User Manual Q&AAnswer
May 02, 2025 - 03:03 AM
To program your personal data on the MEDISANA 40480 Personal Scales with Body Analysis Function, please follow these steps:
1. Press the SET button to switch on the scales. The memory location will start flashing on the display.
2. Use the UP or DOWN button to select the desired memory location (0-9) for your user profile.
3. Press the SET button to confirm the selection. The symbol for sex will start flashing on the display.
4. Use the UP or DOWN button to select the appropriate symbol for your sex (male, female, male athlete, female athlete).
5. Press the SET button to save the setting. The preset height will start flashing on the display.
6. Use the UP or DOWN button to select your height.
7. Press the SET button to save the setting. The preset age will start flashing on the display.
8. Use the UP or DOWN button to select your age.
9. Press the SET button to save the setting.
10. The settings are now concluded, and "0.0" will be shown on the display.
11. You can now choose the unit of measure (kg, lb, st) by pressing the UP or DOWN button.
Please note that if you want to program additional presets or make changes to the existing presets, you can press the UP or DOWN button before switching off the device to program other settings. Repeat steps 3 to 11 for each preset.
For more detailed information, please refer to the MEDISANA 40480 Personal Scales with Body Analysis Function Instruction Manual.
Add New Comment