User Manual Q&AAnswer
May 02, 2025 - 02:42 AM
There are two ways to match the remote control with the receiver for the SKYDANCE RT2 8 Zones Color Temperature Remote Control.
1. Using the controller's Match key:
- To match: Short press the match key on the controller, then immediately press the on/off key (for single zone remote) or zone key (for multiple zone remote) on the remote.
- The LED indicator on the remote will fast flash a few times, indicating a successful match.
- To delete: Press and hold the match key for 5 seconds to delete all matches.
- The LED indicator on the remote will fast flash a few times, indicating that all matched remotes have been deleted.
2. Using Power Restart:
- To match: Switch off the power, then switch it on again. Repeat this process. Immediately short press the on/off key (for single zone remote) or zone key (for multiple zone remote) three times on the remote.
- The light will blink three times, indicating a successful match.
- To delete: Switch off the power, then switch it on again. Repeat this process. Immediately short press the on/off key (for single zone remote) or zone key (for multiple zone remote) five times on the remote.
- The light will blink five times, indicating that all matched remotes have been deleted.
Please refer to the user manual for more detailed instructions and illustrations on matching the remote control with the receiver.
Add New Comment