User Manual Q&AAnswer
Apr 30, 2025 - 11:50 AM
To pair the THIRDREALITY Temperature and Humidity Sensor with the Third Reality Smart Hub, follow these steps:
1. Register and sign in to your THIRDREALITY account, and add the THIRDREALITY hub.
2. Remove the kickstand on the back of the Temperature and Humidity Sensor carefully, open the battery cover on the back, remove the plastic insulation sheet, and the sensor will power on. Alternatively, press and hold the side button on the left side of the sensor for 5 seconds and release it to put the sensor into pairing mode. The blinking cloud icon on the LCD screen indicates the sensor is in pairing mode.
3. Open the THIRDREALITY App and tap the "+" symbol in the upper right corner.
4. Scroll down to choose the Temperature and Humidity Sensor Icon and follow the on-screen instructions to start the pairing process.
5. The sensor will be discovered within one minute as "Temperature and Humidity Sensor 1", and the temperature and humidity data will be displayed in the device list.
6. Tap the Temperature and Humidity Sensor icon to enter the device page, where you can see information like the MAC address, battery level, software version, and history records. You can also rename the Temperature and Humidity Sensor and check for software updates.
For further assistance or troubleshooting, you can visit the THIRDREALITY device support page at www.3reality.com/devicesupport or contact info@3reality.com.
Add New Comment