How do I clear the 'clean' message on my machine after replacing the funnel?

Because the specific brand and model of your machine were not provided, I cannot give the exact button sequence. However, on most coffee and espresso machines, the 'clean' message does not disappear automatically just by replacing a part; it usually requires a manual reset or the completion of a specific cleaning cycle.

Try the following general steps:

• Run the Cleaning Cycle: Most machines require you to initiate a formal cleaning program (often by holding a 'Clean' or 'Menu' button for 3-5 seconds) and letting it run to completion with water or a cleaning tablet.
• Manual Reset: Try pressing and holding the 'Clean' button or the '8-12 cup' button for several seconds until the light turns off.
• Power Cycle: Unplug the machine for at least 30 seconds and plug it back in to see if the display resets.

If the issue persists, please provide the brand and model number of your machine for more specific instructions.