User Manual Q&AAnswer
Apr 30, 2025 - 05:53 AM
To connect the STEGO SHC 071 Sensor Hub to external sensors, follow these steps:
1. Ensure that the installation is carried out by a qualified electrician in compliance with the national power supply guidelines (IEC 60364).
2. Provide the IO-Link sensor hub with a SELV power supply unit according to one of the following standards: IEC 60950-1, IEC 62368-1, or IEC 61010-1.
3. Connect the sensors to the round plug M12, IEC 61076-2-101, 4-pin, A-coded.
4. After the installation, check the assignment of the input channels (1-4) of the device to the sensors.
Please refer to the STEGO SHC 071 Sensor Hub and Sensors User Guide for more detailed instructions and illustrations on the installation process.
Add New Comment