User Manual Q&AAnswer
Apr 30, 2025 - 01:44 AM
To set the timer on the EMOS DCTC01 LED Decoration Light, follow these steps:
1. After the first connection, the light chain will be constantly lit.
2. After the second connection, a green light will light up, indicating that the timer is set to 6 hours on and 18 hours off.
3. The timer will operate automatically in these intervals until turned off by making a third contact.
4. For example, if you connect the light chain on 1 December at 18 o'clock, it will remain lit until midnight and then turn off automatically.
5. On 2 December, it will turn on automatically at 18 o'clock and turn off again at midnight.
6. This means that you only need to turn on the chain once, and it will automatically keep lighting in this fashion until you turn it off.
7. If you want to change the time when the chain automatically turns on and off, simply turn off the chain at the desired time (if it is turned on) and then turn it on again.
8. Please note that the timer may deviate by a few minutes per month. If you want to adjust the turn-on timer back to the original time, set the timer again.
Remember to refer to the user manual for any additional information or safety precautions related to the EMOS DCTC01 LED Decoration Light.
Add New Comment