User Manual Q&AAnswer
Apr 29, 2025 - 10:38 AM
To assemble the MEEC TOOLS 017625 Multi-Function Tool, follow these steps:
1. Carefully remove the product and all the accessories from the packaging and check that all parts are included and undamaged.
2. Put the end of the flexible shaft into the threaded connection on the main unit.
3. xxxx the nut tight to secure the flexible shaft to the main unit.
Note: The parts are not assembled from the factory and must be assembled by the customer. Make sure to use the supplied spanner and do not use the product if any parts are missing or damaged.
For more detailed instructions and illustrations, please refer to the "Assembly" section in the instruction manual provided with the product.
Add New Comment