User Manual Q&AAnswer
Apr 19, 2025 - 05:34 AM
To program the HYUNDAI MOBIS FOB-4F71 Remote Keyless System to your vehicle, follow the steps below:
1. Locate the programming button on your vehicle. This button is usually found under the dashboard or near the fuse box. Refer to your vehicle's owner's manual for the exact location.
2. Insert the key into the ignition and turn it to the "On" position. Do not start the engine.
3. Press and hold the programming button on your vehicle for approximately 10 seconds until the indicator lights on the vehicle's control panel start flashing.
4. While the indicator lights are flashing, press and release any button on the FOB-4F71 transmitter. The indicator lights should stop flashing, indicating that the programming was successful.
5. Repeat step 4 for any additional transmitters you want to program to your vehicle.
6. Turn off the ignition and test the functionality of the FOB-4F71 transmitter by pressing the lock, unlock, trunk, panic, and remote engine start-stop buttons.
Note: If you encounter any issues during the programming process, refer to the vehicle's owner's manual or contact a professional technician for assistance.
Please refer to the HYUNDAI MOBIS FOB-4F71 Remote Keyless System User Manual for more detailed instructions and troubleshooting information.
Add New Comment