User Manual Q&AAnswer
Apr 19, 2025 - 01:38 AM
To pair your rapoo M Series Multi Mode Wireless Mouse with multiple devices, follow these steps:
1. Turn on the mouse.
2. Press and hold the Bluetooth button for at least 3 seconds. The status LED will start flashing green slowly, indicating that the mouse is discoverable for 2 minutes.
3. On your first device, complete the Bluetooth pairing process by searching for available devices and selecting the rapoo M Series Multi Mode Wireless Mouse. Once the pairing is successful, the status LED will turn off.
4. To pair your second device, press the Bluetooth button on the mouse to switch to another channel.
5. Repeat the Bluetooth pairing process on your second device.
6. The rapoo M Series Multi Mode Wireless Mouse can connect up to 2 devices via Bluetooth and 1 device via a 2.4 GHz receiver.
7. To switch between the paired devices, press the Bluetooth button on the mouse. The status LED will indicate which device is currently connected. A stable red light indicates Bluetooth device 1 is paired, a slow flashing red light indicates Bluetooth device 2 is paired, and if the light is off, the 2.4 GHz device is paired.
Note: If the red light on the mouse rapidly flashes twice every two seconds, it indicates low battery. Make sure to replace the batteries to ensure proper functionality.
For more detailed information and troubleshooting, please refer to the rapoo M Series Multi Mode Wireless Mouse User Manual.
Add New Comment