User Manual Q&AAnswer
Apr 08, 2025 - 10:30 PM
To program the Bromic Heating BH3130010 Tungsten Smart-Heat Wireless On-Off Controller, follow these steps:
1. Before programming, select the output L1 or L2 using the switch on the controller.
2. Press the "SET" button twice and hold it down until the "ON-OFF" LED turns on.
3. Wait until the LED turns off to confirm the memorization of the data.
4. To program a double channel, press the "MEM" button two times and hold it on the second time. There will be 2 beeps followed by a continuous sound.
5. While holding the "MEM" button during the continuous sound, press the button on the remote that you want to program. The programming is confirmed by an intermittent sound.
6. To copy a function from one remote to another, press the P3 button inside the already programmed remote. The active receiver will sound continuously. Within 5 seconds, press a button of the already programmed remote relative to the function to copy. The sound will be interrupted and continue for another 5 seconds. During the sound, press a button of the new remote that needs to be programmed. The programming is indicated by an intermittent sound.
7. To delete a double channel function from the receiver, press the DEL button once and hold it down. There will be a slow and intermittent sound. During the sound, press the button of the remote that you want to delete. The deletion is indicated by a continuous sound.
8. To delete all remotes, press the DEL button two times and hold the DEL button on the second time until there is a continuous sound after a quick and intermittent sound. Hearing this sound sequence indicates that the whole memory of the receiver is deleted.
9. To delete a remote from another remote, press the P3 button inside the remote three times. There will be a slow and intermittent sound. During the intermittent sound, press a button of the remote relative to the function to be deleted. The deletion is indicated by a continuous sound.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment