User Manual Q&AAnswer
Apr 08, 2025 - 08:11 AM
To connect external elements to the Zennio ZIOIB24VT Multifunction Actuator, you will need to use the input ports located on the device. One of the two cables of each element needs to be connected to one of the slots labeled "1" to "4", while the other cable should be connected to the slot labeled as "C". Note that all the external input devices share the "C" slot for one of the two cables. Please secure the connection by means of the on-board screws. For more detailed information and instructions, please refer to the installation section of the user manual provided with the device.
Add New Comment