User Manual Q&AAnswer
Feb 27, 2025 - 08:06 AM
To adjust the sensor range and trigger time of the GIANNI RTS Series Wave Sense Infrared Exit Devices, please follow the instructions below:
1. Sensor Range Adjustment:
- The sensor range of the device can be adjusted to detect hand waves within a range of 3 to 15 cm.
- Locate the sensor range adjustment dial on the device.
- Turn the dial clockwise to increase the sensor range or counterclockwise to decrease it.
- Test the sensor range by waving your hand in front of the device and adjust as needed until the desired range is achieved.
2. Trigger Time Adjustment:
- The trigger time refers to the duration for which the device remains active after detecting a hand wave.
- Locate the trigger time adjustment dial on the device.
- Turn the dial clockwise to increase the trigger time or counterclockwise to decrease it.
- The adjustable output time ranges from 1 to 60 seconds.
- Set the trigger time according to your requirements.
Please refer to the provided manual for visual references and additional information on adjusting the sensor range and trigger time.
Add New Comment