User Manual Q&AAnswer
Feb 27, 2025 - 12:28 AM
To install the Fort ECSPKY Smart Security Keypad, follow these steps:
1. Unscrew and open the case of the keypad.
2. Insert 3 AAA batteries, making sure to observe the correct battery polarity.
3. Close the case and secure it with the previously removed xxxx .
4. To mount the keypad, unscrew the case and remove the rear cover.
5. Secure the rear cover to the desired surface using the supplied screws.
6. Reinstall the main unit onto the installed rear cover and tighten them together using the xxxx at the bottom.
Note: Opening the rear cover of the keypad when the system is armed will trigger the alarm. To stop the alarm, disarm the system.
For more detailed instructions and illustrations, please refer to the Fort ECSPKY Smart Security Keypad User Manual.
Add New Comment