User Manual Q&AAnswers
Jan 28, 2025 - 12:07 AM
To reset the LaView LV-PWR15B 4MP Security Camera to factory default settings, follow these steps:
1. Locate the reset button on the camera.
2. Press and hold the reset button for 5 seconds.
3. After 5 seconds, the camera will return to factory default settings and you will hear a welcome ringtone.
4. Wait until the camera is beeping every 15 seconds, indicating that it is ready for pairing.
5. If the camera is not beeping, repeat the reset process.
Note: Resetting the camera will erase all previous settings and configurations.
Jul 10, 2025 - 10:11 PM
To reset your LaView LV‑PWR15B camera, start by unplugging it from power. Locate the small reset button on the back of the camera. Using a pin or paperclip, press and hold the button for about 5 seconds. You should hear a welcome tone, and the camera will begin beeping every 15 seconds—this means it's been reset and is in pairing mode.
If you don’t hear the tone, repeat the process to ensure the reset was successful. For an alternate method, unplug the camera, hold down the reset button, then plug it back in while still holding the button for about 30 seconds. The camera should reboot and return to default settings.
Add New Comment