How do I answer a call using the Jabra Evolve 40 MS Mono USB C headset?
I recently purchased the Jabra Evolve 40 MS Mono USB C headset and I'm not sure how to answer incoming calls. I have connected the headset to my computer, but I'm not seeing any buttons or controls to answer calls. Can you please provide instructions on how to answer calls using this headset?\
To answer a call using the Jabra Evolve 40 MS Mono USB C headset, you can follow these steps:
1. Make sure the headset is connected to your computer via the USB C cable.
2. Ensure that the Jabra Direct software is installed and up to date on your computer.
3. When a call comes in, you will hear a ringing tone in the headset.
4. To answer the call, simply press the call control button located on the right earcup of the headset. The call control button is usually marked with a phone icon or a green button symbol.
5. Once you press the call control button, the call will be answered, and you can start speaking through the headset's microphone.
Note: The call control button may also have additional functions, such as ending a call, muting the microphone, or adjusting the volume. Please refer to the user manual or the Jabra Direct software for more information on these functions and how to use them.
If you encounter any issues or need further assistance, you can visit the Jabra support page for the Jabra Evolve 40 MS Mono USB C headset at the following link: [Jabra Evolve 40 MS Mono USB C Headset Support Page](https://www.jabra.in/supportpages/jab...)
Answer this question
Answers are reviewed before publication.