How do I reset the Air Choice OH12 700W Oil-Filled Radiator Heater if the overheat safety feature is activated?
I accidentally blocked the air intake vent of my heater, and now it has shut off due to the overheat safety feature. How can I reset it and get it working again?
To reset the Air Choice OH12 700W Oil-Filled Radiator Heater after the overheat safety feature has been activated, follow these steps:
1. Turn the Power Switch to the "ON" position, and turn the Thermostat Control Dial to the "OFF" position.
2. Disconnect the power cord from the electrical outlet.
3. Allow the heater to cool down for at least ten minutes.
4. Ensure that both the intake and exhaust vents are clear of any obstructions.
5. Connect the power cord back into the electrical outlet.
6. Turn on the Power Switch, and then turn the Thermostat Control Dial to the highest setting.
After following these steps, the heater should reset and be ready to use again. Make sure to avoid blocking the air intakes or exhaust vents in the future to prevent the overheat safety feature from activating.
Answer this question
Answers are reviewed before publication.