Questions manuals.plus asks 2024-12-27 17:41:00

How do I switch between different laser lines on the Huepar ‎902CG?

I am using the Huepar ‎902CG 360° Cross Line Laser Level and I want to know how to switch between the different laser lines it offers. I am not sure how to do this and would appreciate some guidance.

Accepted answer manuals.plus 2024-12-27 17:42:00
Huepar -902CG-360-Cross-Line-Laser-Level-product
To switch between different laser lines on the Huepar ‎902CG, follow these steps:

1. Turn on the laser tool by sliding the pendulum/transit switch to the unlocked position or by short pressing the keypad.
2. Once the laser tool is turned on, you can switch between different laser lines by short pressing the keypad repeatedly.
3. Each short press of the keypad will cycle through the available laser line options.
4. Keep pressing the keypad until you reach the desired laser line composition.

Note: The Huepar ‎902CG offers multiple laser line options, including horizontal and vertical lines. By short pressing the keypad, you can easily switch between these different line configurations to suit your specific needs.

For more detailed instructions and information, please refer to the "Operation Modes" section in the user manual provided with the product.
902CG 360°Cross LineHueparLaser Level
Open related manual Ask another question
How do I change the height of the horizontal beam after the laser level has automatically leveled? 1 answer • To change the height of the horizontal beam on the Huepar 902CG while it is in self-leveling mode, you must physically adjust...

Answer this question

Answers are reviewed before publication.