How do I turn on the lights and sounds of the iPlay, iLearn PP-PLAN-263 Airplane Dollhouse Playset?
I just purchased the iPlay, iLearn PP-PLAN-263 Airplane Dollhouse Playset and I'm not sure how to activate the lights and sounds. Can you provide instructions on how to turn them on?
To turn on the lights and sounds of the iPlay, iLearn PP-PLAN-263 Airplane Dollhouse Playset, follow these steps:
1. Make sure the playset is assembled and all parts are securely attached.
2. Open the battery compartment located on the playset.
3. Insert 3 AA batteries (not included) into the battery compartment, making sure to align the positive and negative ends correctly.
4. Close the battery compartment.
5. Place the pilot figure, Ethan, in the pilot seat.
6. Push the control stick back while Ethan is sitting down to activate the lights and sounds.
7. The realistic lights and sounds will come on, making it feel like the plane is taking off.
Please note that if the lights and sounds do not work, you may need to replace the batteries with fresh ones. Also, make sure the battery terminals are properly connected. If you continue to experience issues, refer to the troubleshooting section of the instruction manual or contact the manufacturer for further assistance.
Answer this question
Answers are reviewed before publication.