How do I install the Dorras Wheel Lights-1 on my bicycle?
I just purchased the Dorras Wheel Lights-1 and I'm not sure how to install them on my bike. Can you provide step-by-step instructions?
Installing the Dorras Wheel Lights-1 on your bicycle is a simple and tool-free process. Here are the step-by-step instructions:
1. Insert the AAA battery (not included) into each light unit.
2. Unscrew the screws on the bike wheel light to separate the two halves of the light.
3. Place the light on the spoke of your bike wheel, aligning it with the provided slots.
4. Secure the light by inserting the xxxx through the slot and tightening it with the nut provided.
5. Repeat the above steps for the second light unit on the opposite side of the wheel.
It's important to ensure that the lights are securely fastened to the spokes for optimal visibility. Once installed, the lights will illuminate when the bike is in motion.
For more detailed installation guidance, please refer to the user manual provided with the Dorras Wheel Lights-1.
Answer this question
Answers are reviewed before publication.