How do I connect the VHF-4005 microphone system to my audio equipment or mixer?

To connect your VHF-4005 wireless microphone system to an audio mixer or amplifier, follow these general steps:

1. Power Connection: Plug the provided AC/DC power adapter into the DC input jack on the back of the VHF-4005 receiver and connect the other end to a power outlet.
2. Audio Output Connection: Locate the audio output jacks on the rear of the receiver. You typically have two options:
   • Mixed Out (1/4" Jack): Use a standard 1/4" (6.35mm) TS mono cable to connect this jack to a microphone input or line input on your mixer. This combines all microphone signals into one cable.
   • Individual XLR Outputs: If your mixer has XLR inputs, use balanced XLR cables for each channel to allow for independent volume and EQ control of each microphone on the mixer.
3. Mixer Setup: Turn the volume/gain down on your mixer channel before connecting. Once plugged in, turn on the receiver and the microphones.
4. Testing: Slowly increase the gain or volume on your mixer while speaking into the microphone to reach the desired level.

Note: As specific manual documentation for the VHF-4005 was not provided, ensure you check the labels on the back of your specific unit to confirm jack types.