How do I calibrate the Fuzion FZ-200 Mini Digital Gram Scale?
I recently purchased the Fuzion FZ-200 Mini Digital Gram Scale and I want to ensure that it is accurately calibrated. Can you provide instructions on how to calibrate the scale?
The Fuzion FZ-200 Mini Digital Gram Scale comes pre-calibrated from the factory, and in most cases, recalibration is not necessary. However, if you believe that the scale is not providing accurate readings, you can follow these steps to calibrate it:
1. Ensure that the scale is placed on a stable and level surface.
2. Press and hold the power button for a few seconds until the scale displays "CAL" on the screen.
3. Release the power button and wait for the scale to display a calibration weight value.
4. Place the calibration weight on the center of the scale's platform. The weight should match the value displayed on the screen.
5. Wait for a few seconds until the scale completes the calibration process. It will display "PASS" if the calibration is successful.
6. Remove the calibration weight from the platform and turn off the scale.
7. Turn on the scale again to start using it.
Please note that for accurate calibration, you will need a calibration weight that matches the maximum weight capacity of the scale (200 grams in this case). Calibration weights are not included with the scale and need to be purchased separately.
If you encounter any difficulties during the calibration process or have further questions, we recommend reaching out to the Fuzion after-sale support team for assistance.
Answer this question
Answers are reviewed before publication.