How do I calibrate the Fuzion BX-200 Digital Pocket Scale?
I just received my Fuzion BX-200 Digital Pocket Scale and I want to make sure it is calibrated correctly. Can you provide instructions on how to calibrate the scale?
Calibrating the Fuzion BX-200 Digital Pocket Scale is a simple process. Here are the steps to calibrate the scale:
1. Ensure that the scale is clean and free from any debris or objects.
2. Place the scale on a stable and level surface.
3. Press the power button to turn on the scale.
4. Wait for the scale to display "0.00" or "0.000".
5. Press and hold the "MODE" button until the display shows "CAL".
6. The scale will prompt you to place the 50g calibration weight on the platform.
7. Carefully place the 50g calibration weight on the platform and wait for the scale to stabilize.
8. Once the scale stabilizes, it will display a calibration value (e.g., "CAL 50.00").
9. Remove the calibration weight from the platform.
10. The scale will display "PASS" if the calibration was successful.
11. Press the power button to turn off the scale.
Your Fuzion BX-200 Digital Pocket Scale is now calibrated and ready to use. It is recommended to periodically check and recalibrate the scale using the provided 50g calibration weight to ensure accurate measurements. For more detailed instructions, please refer to the "Calibration Procedure" section in the Quick Start Guide included with the scale.
Answer this question
Answers are reviewed before publication.