How do I start the Troy-Bilt 2800 PSI pressure washer?

To start the Troy-Bilt 2800 PSI pressure washer, follow these steps:

1. Ensure that the pressure washer is on a level surface and the fuel tank is filled with gasoline.
2. Turn the fuel valve to the "On" position.
3. Move the choke lever to the "Choke" position if the engine is cold. If the engine is already warm, move the choke lever to the "Run" position.
4. Locate the engine switch and turn it to the "On" position.
5. Pull the starter grip slowly until you feel resistance, then give it a quick, strong pull to start the engine.
6. Once the engine starts, let it run for a few minutes to warm up.
7. Gradually move the choke lever to the "Run" position if it was in the "Choke" position.
8. Your pressure washer is now ready to use.

For more detailed instructions and safety precautions, please refer to the Troy-Bilt 2800 PSI pressure washer User Manual.