How do I pair two BolaButty Bluetooth speakers for stereo sound using TWS (True Wireless Stereo) pairing?

To pair two BolaButty Bluetooth speakers for a stereo sound experience using TWS pairing, follow these steps:

1. Ensure both speakers are charged and turned off.
2. Turn on both speakers by pressing the power button.
3. Make sure the speakers are not currently connected to any other device. If they are, disconnect them by pressing and holding the play/pause button until you hear a prompt tone indicating disconnection.
4. With both speakers on, press and hold the play/pause button on one of the speakers until you hear a beep or a prompt tone, indicating that it is in pairing mode.
5. Wait a few seconds for the two speakers to automatically connect to each other. You will hear a confirmation sound or tone once they are successfully paired.
6. On your Bluetooth device, go to the Bluetooth settings and search for the speaker's name (usually indicated as 'X-GO' or similar).
7. Select the speaker's name to connect. Your device will now play audio through both speakers, creating a stereo sound experience.

Remember to keep the speakers within range of each other (typically within 33 feet or 10 meters) to maintain the TWS connection. If you experience any issues, refer to the speaker's manual for troubleshooting tips or contact BolaButty customer support for further assistance.