PYLE PRJLE78 Home Theater Multimedia Digital LED Projector

Accessories

Please confirm the following after you open the package

Packing list

• Projector—————————1
• Lens lid—————————–1
• Remote control——————–1
• Power cable————————-1
• AV cable————————–1
• User manual———————–1
• Extra fuse————————1
• Len cleaner————————-1

Optional accessories

1. Projector screen(Matt White, Electric)
2. Ceiling Mounts

Safety precautions

Warning;
when using this projector, please read this manual carefully. If the wrong operation, it will cause electric shock or fire. so when using and repairing this projector, please comply with the following points.

1. Read manual
   Before using this projector, please read the full manual carefully and operate it according to this manual instruction
2. Clear
   when clear this projector, please pull out the power cable. Use the wet cloth to clear,not the cleasner
3. Accessory
   please use our recommended accessory. Or it will damage the projector.
4. Use the environment
   Donot place the projector in wet environment
5. installation and’fix
   please place this projector in the stable table.
6. Ventilation
   the ventilation in the projector is best for the projector work stably. Do not let the dust wall up the filter. Or it will cause the projector high-temperature protected. So please use the water to clear the filter per month.
7. Power
   please make sure the power same as your projector inquiry specification. (220 V or llOV)
8. Earthing wire
   this projector has earthing Wire. It is three pin plug.
9. protect the power cable
   Please confirm the power cable are perfect when connecting the projector.
10. Thunder
    when the thunder happens or long time no use, please pull the power cable out of the projector.
11. Repairment
    As the high voltage inside, please do not open or try to repair the projector by yourself. . Please ask a professional technician to repair the projector.
12. Far away Heat device
    please make sure this projector is far away from another heating device. It will damage the projector’s service life.

Caution

About the installation

1. In order to improve the projector service life, It should not place in wet and ventilation conditions
2. Donat put the projector under the sunshine directly
3.  Projector working temperature: 0°C ~+35°C O
4. Projector store temperature: -20°C ~+ 70°C o
5. DonOt blocks the ventilation window of the projector. If the projector’s interior temperature is too hot, the machine will be shut off automatically. This is hot­ protected system. So please clean the filter of the projector per month. It is very important. Don’t let the dust cover the filter.
6. About Open and closing the projector
7. when close the projector, press the power key again. And then the lamp shut off. But the fans still work until 5minutes later. When close the projector, do not pull out the power cable directly. After 5 minutes, the projector will shut off automatically.
   WARNING
   The fan is to keep the projector’s temperature low. It will turn on when projector is turned on. The speed of the fan is according to the heat of the projector. Do not unplug the power cable when the projector is not turned off and the fan is still working. If the fan stops working, the projector may be damaged due to over heat.

Installation

For best quality of image, avoid direct sunlight. Draw the curtains up if using during the daytime.

Projector Installation

Standard setting (Front projection)

Please refer to the following table to adjust your picture size and distance ( from the lens to screen )

Please allow+- 3% to the image sizes of the above table. If the distance is less then 2 meters and more then 5 meters, the image could be blurry.
Warning
Please check the following pictures for the trapezoid adjustment.

Installation method
Contact a professional service man to mount this projector to a ceiling
Follow the instruction below for the correct projector positions:

Warning：

1. This projector might damage beyond repair when it is incorrectly mounted on a ceiling or when it is in correctly installed on a surface or installed on a incorrect surface. It may also inflict damage to people nearby
2. This projector can only be used in an environment with a temperature not exceeding the range of 0-35 degree.The projector may malfunction if temperatures vary outside the normal operating rage
3. The sharpness of the screen might be interrupted when the projector is being used in a dusty,wet, moist or smoke-filled environment.
   The projector might malfunction in a moist or wet environment
4. Take care of sufficient ventilation around the projector.
   Otherwise, this projector might overheat and cause life-threatening situations
5. The first operation of the projector may cause an unclear image,
   Please refer to the image adjustment for help

MACHINE INSTRUCTION

1. Focus lens
2. IR receiver
3. Level-stand adjustment
4. Cool winds input ventilation
5. Input terminal
6. Power switch
7. Keystone
8. Hot winds output ventilatioN
9. Speake
10. Level-stand adjustment
11. Projector mount hole
12. Label
13. Cool winds input ventilation

INPUT TERMINALS

USB support format

1. Support video : MPG .MPG-I MPG-2. MPG-4. AVI. MP4 DIV, TS TRP MKV, MOV WMV RM RMVBB
2. Support picture: JPEG BMP 3.
3. support audio:MPG MPG-l, MPG-2, MPG-4, AVI MP4, DIV, TS, TRP, MKV. MOV, WMV, RM. RMV

Caution
Please connect the input signal cable well, then turn on the projector. Otherwise, it is easy to damage the projector.

REMOTE CONTROL INSTRUCTIONPANEL KEYSTONE INSTRUCTION

PANEL KEYSTONE Sketch map

1. Power key
   It turns on or off the projector. The function is the same as the “power” on the remote control.
2. Menu
   It adjusts the menu by Up/Down, Left/Right.
3. Direction operation Key
4. Sources
   It chooses the input signal (such as AV, YPBPR, HDMI 1/2, USB1/2, or PC)
5. Indicator light red color: standby green color: working

Turn on/off the projector

Turn on the projector

Image adjustment

When operating the projector for the first time, the image may appear unclear or trapezoid. It is caused by focus of the lens and/ or trapezoid uncorrected. Please follows the following steps for correction:

Focus adjustment

1. Turn the lens clockwise to the projector, then turn it counterclockwise slowly. At the same time, check the resolution point carefully. When image is clear (as the middle area of the image), it will be the best position of the lens.
   NOTE: When you replace the projector from a cold to a warm environment water vapour might occur. Don’t turn the projector on when this occurs but wait until the vapour has disappeared.
   KEYSTONE
   If a projected picture has keystone distortion, correct the image with keystone adjustment. The image becomes a trapezoid shape when the screen or projector is not leveled . Please reposition the projector to improve its angle to the screen. However, the circumference of the image may not be focused.
   If not able to use the keystone correction function to correct the trapezoid distortion, please lower the projector to center the screen vertically.

Menu setting

Menu settings method

1. During operating the projector, press “menu” key, the projector shows the windows as a picture(1).
2. Press key, enter the submenu picture >sound>time>option in turn
3. after confirming the submenu,use to select your inquired submenu. as picture (2
4. use “OK” and to adjust the parameters.
5. after finishing all settings, press “menu” again, exit settings 6 repeat the steps2) –
6. set up all parameters.

Parameter adjustment

1. Press the “menu” key, until displaying the above picture of the menu;
2. Press the “▲/▼” key，select the option that need to adjust
3. Press the “OK” key，use the “◀/▶”button to adjust the certain parameters
4. Press the “menu” key again exit the menu page parameter adjust station。

Picture Menu

Sound Menu

Time Menu

Menu setting method

multimedia menu

Note:
The signal source multimedia 1 mode, you can operate on USB1 interface disk;
The signal source multimedia 2 mode, you can operate on USB2 interface disk;

CAUTIONS：

1. The use interface support USB1.1 and USB2.0, including hard drive and fresh drives
2. The max. Storage supported is 400Gb
3. The system format supported:
   FAT16、FAT32、NTFS
4. The usb interface can support most drives but is not universal, any unknown device problem is caused by the device drive
5. The total voltage of the connected devices shall not be over 1200mAh,the problems casued by the wrong operation will not be warranted

Troubleshooting

The projector is so easy to use as the TV. While some problems my occur because of the environment and voltage. Please try to recognize the fake malfunction before refer to the technicians.

SPECIFICATION

• LCD Panel Model 5.8″ TFT
• Input signal video component video(Ypbpr) ,VGA, HDMI , USB audio stereo
• Output signal audio SW X 2 speaker
• LCD native resolution 1280*8000upport 1080P contrast ratio 1500:1
• Lens aperture 3.8 focus 185mm
• Lamp led 150W life 50,000 hours
• Image size 50-200nch brightness 2800Lumens keystone + 15 degree
• Power voltage ACI 10 -240V /50-60Hz
• power consumption 180W
• Working condition temperature 32°F ~158°F humidity 10 % ~65 %
• Store condition temperature humidity
• Remote control frequency
• Dimensions: 13.2 x 10.4 x 4.6 inches
• Weight: 7.7 lbs.

(Note: no notification will be made in advance if any of the above specifications were changed or updated.)

Warranty card Ⅰ

Warning

• Please remember the model and series number of the projector in case of loss.
  Please carefully check all accessories with the pack list before throwing the package away. When you use this projector, please carefully read user manual.
• High-brightness lamp!
  Avoid staring or looking directly at the light, especially for children.
• Avoid placing the projector in wet condition in case of electric shock danger.
• It indicates there is a instruction for an important operation
• It indicates there is a dangerous Voltage inside that may cause shock
• Warning： As an A-class product, the projector may cause radio interference Users shall take effective measures to deal with it.

About the remote control battery

• The remote control battery should be fixed correctly Otherwise, it will be damaged for overheat
• Make sure the remote control is out of children’s reach

Warranty clause

1. warranty range
   All projector is purchased by our distributor or agent, we offer the warranty service during valid warranty time.
2. warranty time
   From the date of production on the projector label, we offer 12 month warranty period for the projector. But the halogen lamp only has 6-month warranty; the LED lamp has a 24months warranty
3. warranty condition( except for the following status)
   • warranty card or purchased invoice are lost.
   • alter or dilacerate the date of production in the projector 1able
   • the user does not operate the projector according to use manual and damages the projector
   • the projector is out of warranty time
   • Flood fire natural disasters and all the factors force major damage
4. to warranty service
   if your projector is broken during the warranty period, please contact the distributor where you bought it. They will offer you the required service.

FAQs

Does this Unit truly produce 1080p or just 1080i

References

• User Manual