Pyle PCA12BT Mini Bluetooth Stereo Power Amplifier
FOREWORD
Your New Pyle Amplifier gives you the power and versatility you need in a professional sound system. The amplifier’s wide frequency response makes it suitable for amplifying music or vocal program material. PCA12BT can be compatible with any mobile device and computerized devices (MP3) via 3.5mm to RCA converter. Please read this manual thoroughly before you attempt to set up and use the amplifier. t contains a range of installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of trouble-free service from this product.
What’s In the Box
- Quick Start Guide
FEATURES AND CONTROLS
FRONT PANEL
- POWER On LED Indicator
Lights to indicate whether power is turned on or off. - Main Power on Switch
The amplifier is switched ON or OFF by using this switch. - USB Charge Port
USB port charges for smartphones, not for USB reader function. - AUX/CD IN
Lets you easily connect the computerized MP3 Device (player) sources, such as PC(CD ROM), laptop, walkman, iPod, and cell phone. - BLUETOOTH Indicator
When switches to Bluetooth mode, the indicator light will be on. When plays by Bluetooth mode, the light will flash. - Bluetooth/Line input switch
Mode button switches between the Bluetooth and Line audio inputs. Pushed in is for Bluetooth function, and pushed out is for Line input. - Master Volume Control
Lets you adjust the overall sound level and turn the knob clockwise to increase the volume.
BACK PANEL
- Bluetooth Antenna
The use of an antenna is best receiving for the Bluetooth signal. - RCA Cable L/R LINE Input
Lets you connect the desired LINE input source. - Push Type Speaker L/R Terminals
Let you easily connect the speaker’s wires directly to the amplifier - 110V/220V Switch
According to power voltage, push this button to the correct station of 110V or 220V. - Fuse
The amplifier uses a fuse for protection against surges and short circuits. If the amplifier suddenly turns off and will not turn on, check the fuse. If necessary, replace it with a 1-amp, 250-volt, fast-acting, 5x2Omm fuse (not supplied) - AC IN Power Cord
Connect to AC 110V/60Hz or 220V/50Hz
BLUETOOTH FUNCTION INSTRUCTION
External devices which have a built-in Bluetooth feature can be connected to this amplifier wirelessly to play through the amplifier’s speakers.
- Be sure that the amplifier is powered on. And it’s better to pull the Bluetooth Antenna on at the back of the panel for better receiving. Press the MODE button on the front panel in like BT situation and the Bluetooth Indicator is light on. (The unit is automatically ready to pair with your device)
- Turn on the Bluetooth function of your external device.
- Search for available devices within range of your external Bluetooth device.
- Wait for a while then find the “TD301-RY” on the paired devices list on your external device and select “TD301-RY”, or find the “BT” on the paired devices list on your external device and select “BT”.
- Your amplifier will beep and the lights will flash once when pairing is a success.
- You can now play music and other audio on your external device through your amplifier
- The amplifier will beep and the lights will flash once again when the external device is turned off or unpaired.
CARING FOR YOUR PYLE AMPLIFIER
Your Pyle Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use: Keep the amplifier dry. If it gets wet, wipe immediately. Use the amplifier only in well-ventilated installations. Handle the amplifier away from dust and dirt. Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemicals, solvents, or detergents!
IMPORTANT
Replacing a fuse
This amplifier requires a fuse with the proper rating for protection from power surges and short circuits. If the amplifier suddenly turns off or will not turn on. the fuse is properly blown. 
Let the amplifier cool down and see if it starts again before you assume a fuse needs to be replaced. Unplug the amplifier from the AC outlet. Turn the fuse holder cap and pull out the cap. Remove the old fuse and replace it with an identical one.
CAUTION Never use a fuse with a higher rating.
TROUBLESHOOTING
LIMITED WARRANTY
All PYLE products are carefully constructed and tested before shipment. Units purchased in the USA are warranted to be free of defects in material and workmanship for one (1) year from the date of purchase. This warranty is limited to the original retail purchaser of the amplifier. Should the unit fall due to factory defects in material or workmanship? your unit will be repaired or replaced at the sole discretion of PYLE. To obtain warranty service, you must first call our Consumer Return Hotline at 718-236-6948 to obtain a Return Authorization Number. This R.A # must appear on the Outside of your package and on all paperwork relating to your return.
You must also include the following items with your return: A copy of your sales receipt or other proof of purchase A brief letter, indicating the problem you are experiencing with the product Include in your return address, daytime phone number and R.A. number Also include a check or money order for $20.00 for return shipping, handling and insurance, or provide your Visa/ MC number with an expiration date.
Our obligation under this warranty is limited to the repair or replacement of the defective unit when it is returned to us prepaid. This warranty will be considered void if the unit was tampered with, improperly serviced or subject to misuse, neglect or accidental damage.
SPECIFICATION
- Output power, 2 channels driven
- 4-ohm, 1 kHz 1% THD 15 Wx2
- 4-ohm, 1 kHz 10% THD 10.1 Wx2
- Peak Power 25 V Wx2
- Total Harmonic Distortion, 1 kHz Rated Power 0.3%
- Input Sensitivity, 1 kHz, 4-ohm Rated Power 150mV
- Frequency Response 20Hz-40KHz
- Signal to Noise Ratio 75dB
- Power Requirement 120V AC 60 Hz or 230V AC 50Hz
- Dimensions 5.6″ x 2.6″x4.2″ inch
FAQs
Enter Wireless BT mode by pressing the MODE button underneath the LCD panel. C. Choose the Wireless BT name “Pyle Speaker” and wait for the device to pair.
By utilizing Bluetooth’s radio frequency connection, a Bluetooth amplifier can turn your beloved wired headphones into wireless Bluetooth headphones.
Before it is supplied to the speakers, an amplifier makes a larger copy of the input signal from a source, such as a laptop, turntable, or CD player. Your mains electricity, which is routed straight to the amplifier’s power source, provides the energy needed to accomplish this.
As they stand, Bluetooth protocols can easily transmit standard line-level signals. Similar to wired arrangements, this signal level needs to be amplified by a power amp before it can effectively drive the loudspeaker driver(s).
The speaker may need to be unpaired, then repaired with your device. 1. Before beginning the connecting process, make sure the Bluetooth Speaker is ON.
As you increase the level, factory speakers have a tendency to crackle and distort the music, while speakers supplied by an amplifier don’t. No matter how little or inexpensive an amplifier is, adding one will make music louder, easier, cleaner, and more distorted. free audio
The nature of a speaker is mechanical. Its mechanics are animated by a variety of electrical characteristics. But an amplifier uses electricity. It indicates that we are unable to hear or see what enters or exits.
Turn on BT mode on your phone before starting the pairing process. The “PYLE” name will appear when the phone locates this ship/car audio system. In order to pair and connect with this ship/car audio system, select the “PYLE” from the device list. The BT logo will stop flashing after you confirm.
Activate the device. To turn on Wireless BT, press the ON/OFF switch on the front panel until the indicator light is on. Search for the Wireless BT name “PYLE SPEAKER” using your Wireless BT phone or another device. Choose the Wireless BT name “PYLE SPEAKER” and wait for the device to pair on its own.
How Should My Pyle USA Speaker Be Connected with NFC Enable the NFC feature if your device is NFC compatible? To link the speaker with your Android device, touch the NFC region on your Android device F2. The speaker and the speaker have paired automatically when an Android device is inserted into the speaker.
You must first navigate to the NFC section on your Android device, F2, in order to pair the speaker with your phone. You can purchase a Bluetooth transmitter that connects straight into your TV’s audio-out jack (3.5mm headphone jack, RCA connectors, USB, or optical) if your TV does not support Bluetooth.
HOW TO LINK. You may find Pyle Audio in the Bluetooth settings of your iPhone or Android device. Input your pairing code, which is 0000, and click on it.
The majority of outdoor speakers are passive devices, which means they will require power because they lack built-in amplification.
A stereo receiver can be placed outside as well. We used to keep the receivers indoors and separate from our sound system back in the day. The indoor receiver and speakers were wired together.
Put the receiver and amplifier close to the TV, find the audio jack and the audio input, and connect the cables to the receiver and amplifier. Before connecting, make sure all equipment is off. Before testing, make sure the receiver amplifier’s level is on the lowest setting.
