Pyle 4-Channel Bluetooth Home Power Amplifier - 2000 Watt Audio Stereo Receiver w/ Speaker-Complete Features/Instruction Guide

Thank you for purchasing this amplifier. Please read this operating instruction carefully before using. It will acquaint you fully with all its features and help you enjoy your time.

The product adopts the most advanced digital technology in the world. It is 4 channels with its high power output, so to speak, the real acoustic center of your family movie theatre. It is designed to be a multi-functional AM/FM Tuner, Mp3 input jack, and headphone input jack. It is a product of the finest accompanying acoustic amplifier when applied to TUNER, MP3, BLUETOOTH,
DVD/CD, etc. The brings you the first ever hybrid Amplifier with designed Sub out and Pre out to adjust to every situation.

FEATURES

High-Powered Hybrid Preamplifier Receiver
Built-in Bluetooth for Wireless Music Streaming
Powers up to (4) Speakers
AM/FM Radio with VFD Digital Display
USB Flash Drive & SD Memory Card Readers
MP3 Digital Audio File Support
Connect & Stream Audio from External Devices
Aux (3.5mm) Input Jack
(2) 1/4’’ Microphone Inputs
Headphone Jack, 1/4’’
RCA (L/R) Audio Connectors
Screw-Type Speaker Terminal Binding Posts
Volume, Subwoofer, Tone, Echo, Mic. Volume Controls
Front Panel Button Control Center
Built-in Cooling Fan
2.4G Bluetooth antenna
Bass, Treble, Balance control

BLUETOOTH CONNECTIVITY

Receives Wireless Signal for Audio Streaming
Works with All of Your Favorite Devices
(Smartphones, Tablets, Laptops, Computers, etc.)
Bluetooth Version: 2.1
Bluetooth Network Name: ‘Pyle Audio’
Bluetooth Wireless Range: 20+ Ft.
Bluetooth Network Password: – Not required

FRONT PANEL

POWER SWITCH
Press to switch the power unit ON or OFF
PREV
This button is used to select the previous station in the system
NEXT
This button is used to select the next station in the system
MENU CONTROL
This is used to Increment the end decrement level for the selected function of Mister Volume, Bass. Treble, Balance. Auto station seek.
INPUT
This is used to select the input sources such as DVD/CD, TUNER, MP3, USB, and BLUETOOTH
SUBOUT VOLUME CONTROL
MASTER VOLUME CONTROL
Adjusts the volume level. Turn the button clockwise to increase the volume
ECHO CONTROL
Turn the knob to adjust the MIC echo level
MIC TONE
Adjusts the tone of MIC
MIC VOLUME
Adjusts the volume level. Turn the knob clockwise to increase the MIC volume
LED
Adjust the blue lights and blue rings
A/E SPEAKERS OUTPUT SELECTOR
Three modes: A. B. A+B
FUNCTION DISPLAYED FLUORESCENT WINDOW
AM/FM/USB/SD SELECTION
Press it to select AM/FM when in Tuner input, Press it to select USB/SD when in USB input.
AUTO SCAN
AM/FM auto scan selector, scan and store stations automatically.Can store 30 stations
MIC INPUT JACKS 1/2
KARAOKE MIC connects to these jacks
HEADPHONE JACK
Headphones connect to this jack
MP3 JACK
MP3 connects to this jack
USB/SD inputs
Insert the USB flash driver or the SD card

REAR PANEL

TUNER ANT
Connect for AM and FM antenna
AUDIO INPUT JACK
Connect the audio output jacks of DVD/CD to these jacks
RECLINE OUTPUT JACK
Connect the RECORD input jacks to these jacks.
PRE OUTPUT JACKS
Connect the professional input jacks to these jacks
SUBWOOFER OUTPUT JACKS 1&2
A B (Right) SPEAKER OUTPUT TERMINALS
Connect your speaker system to these terminals.
A B (Left) SPEAKER OUTPUT TERMINALS
Connect your other speaker system(s) to these terminals.
COOLING FAN
110V/220V SWITCH
According to power voltage push this button to switch between 110V and 220V
POWER CORD
Connect to AC 110V/60Hz & 220V/50Hz outlet.
BLUETOOTH ANTENNA
This is the 2.4G Bluetooth antenna,

TECHNICAL SPECS

MAX Power Output: 2000 Watt
600 Watt @ 2 Ohm
460 Watt @ 4 Ohm
240 Watt @ 8 Ohm
Frequency Response: 40Hz-15kHz, +/-2dB
Impedance: 8 Ohm
S/N Ratio: >76dB
T.H.D.: <1%
Radio Station Memory Presets: The unit can save maximum 30 stations if more than 30
stations are available.
Tuner: Quartz Synthesized Radio
Maximum USB/SD Flash Support Size: 32GB
Power: 110/220V, Switchable

REMOTE CONTROL

AUTO
Automatically search the signal source when power on
DIGITAL
Tuning AM/FM number button
27) TREBLE-/TREBLE+
Master treble down and up
/25) L/R
Left/ Right Balance Control
MUTE
Mute Selector
23) BASS- / BASS+
Master bass down and up
SPEAKER
Speaker (A/B/A+B) selector
DSP
Music DSP selector
AUTO SCAN
AM/FM auto scan selector, scan and store station
automatically. Can store 30 stations
AM
Multi-functional key. It is AM selector when it is TUNER
mode.
MEMORY
After a station has been found, store the station by pressing the MEMORY button. The screen will display SAVE.
17) PREV & NEXT
Station preview and next selector
ST/MONO
Stereo and mono selector
/15) TUNING- TUNING+
The two keys are used to adjust to the best signal
of the stations
LED
Led mode selector
/20) VFD- VFD+
VFD down and up selector
FM
Multi-functional key. This is FM selector when it is
in TUNER mode.
OFF
Music DSP off selector
LOUD
Press the button to increase both bass and treble
26) VOL- VOL+
Master volume down and up
DVD/CD /TUNER /BLUETOOTH /MP3/USB
Signal input select

REMOTE CONTROL OPERATION

The remote control should be operated within 6 meters and scope of 30 degrees in front of the receiver.
Make sure that there are no large obstacles between remote control and machine.
The remote sensors should be far away from the light, high amounts of light can affect its performance.

SAFETY PRECAUTION

Read all documentation carefully before operating the equipment. Retain this manual for future reference. Follow all instructions printed on the unit for proper operation.

Do not open the cover (or back cover) to reduce the risk of electric shock or fire.
There are no user-serviceable parts inside. Refer to Servicing to qualified service personnel.
This symbol is used to alert the operator to the presence of important Operating instructions and precautions detailed in the documentation manual.
This symbol is used to warn operators that uninsulated dangerous voltages are present within the product’s enclosure that may pose a risk of electric shock.

Warning
To avoid fire or risk of electric shock, do not expose this unit to rain or moisture.

NOTES

Make sure the power outlet conforms to the power requirements listed on the back of the unit.
The main voltage must be correct and the same as that printed on the rear of the unit.
Do not use the unit if the electrical cord is frayed or broken.
The unit shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the unit.
The unit shall be connected to a mains socket outlet with a protective earth connection.

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.

Frequently Asked Questions

Can I use this to power two 12-inch subs?
I guess you could, but it won’t last long. Mine burnt up with no subs on it. I had 4- 6 1/2″ speakers running off of it and it lasted all of 8-9 months. The unit is trash.
Will the receiver power a 10’ passive sub a long with 2 Bose outdoor speakers around our pool area. Mainly asking about the sub power?
Hi, that will depend on the specs of the speaker that you wanted to use especially the wattage. The unit can handle up to 2000 watts speaker @ 4 to 8 ohms. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box P2203ABTU for more details.
Does the remote control volume? We bought a device and had to return it because the remote doesn’t control the volume.?
Yes, you can use the volume button on the remote control. For other concerns and inquiries kindly call our Technical Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST.
Does it run off a regular 110 or a 220 outlet?
Hi, the power of the unit is switchable 220 or 110 volts.
I have an Onkyo 7.2 a/v receiver, I have built a couple of tower sets which include 2-12″ subs. how would I power them with this amplifier?
Hi, that will depend on the specs of your receiver that you wanted to connect to this power amp. This unit can handle up to 2000 watts.
Does this have 2 RCA inputs like it say or 1 as it shows?
The receiver has 1 input port.
Can you power 1 set of 3-way 8-ohm speakers and 1 set of 4-way 4ohm speakers at the same time?
Yes, you can but we highly suggest you use the same speaker ohms.
Can a subwoofer be attached?
Yes, you can use a subwoofer to this unit.
Can you power the unit on and off from the remote?
I believe you can put it on standby with the remote but to completely shut it down you must push the button on the receiver.
Can you program FM radio stations if so how is it done?
Yes, you can save the radio stations by pressing the Memory button on the remote control.

View Fullscreen

References

User Manual

Pyle 4-Channel Bluetooth Home Power Amplifier – 2000 Watt Audio Stereo Receiver w/ Speaker

Specifications

Introduction