Pulsar-LOGO

Pulsar MP5 Relay Module

Pulsar-MP5-Relay-Module-PRODUCT

Intended use

  • The MP5 (AWZ520) relay module is to be used in low-voltage installations.
  • It is intended for controlling and status indication in e.g. alarm or access control systems.
  • It may be used to control devices of high power consumption via OC outputs of alarm systems.
  • Moreover, it ensures galvanic isolation of signals, and power sources relating to the outputs of the module.

Installation

  • The module is equipped with a plastic panel with self-adhesive tape that enables fixing it to a flat surface (side panel of an enclosure, a buffer PSU, etc.) and holes for bolting the panel to the mounting surface.

Description of the module

Components

1 – module’s input terminals
2 – relay
3 – module terminals
4 – module’s output terminals

Connectors

-I+÷I5+ inputs of the voltage that control the relay
C1÷ C5 – common terminal of the relay
NO1÷ NO5 – normally open relay’s contact
NC1÷ NC5 – normally closed relay’s contact

Electrical diagram

Pulsar-MP5-Relay-Module-FIG-1 (1)

Specifications

Voltage of the relay’s coil10 ÷ 14 V DC (-/+5%),
The current of the relay’s coil37 mA@12 V DC
Number of relays5
Voltage of the relay’s contacts30 V DC / 48 V AC
The current of the relay’s contacts2 A max.
Contacts of relayC/NC/NO (leads Φ2.05 mm: AWG 24-12)
ON/OFF time15ms/8ms (-/+5%)
Operating temperature-10°C ÷ +40°C
Enclosureopen-frame design, IP00
DimensionsL=140, W=43, H=25 [mm, +/-2]
Net/gross weight0,09 / 0,12 [kg]
Installationinstallation tape or installation bolt x 2
Declarations, warrantyCE, 2 years from production date
Notesleads on connections: Ø 0,41÷1,63 (AWG 26-14), Ø 0,51÷2,05 (AWG 24-12) – relay contacts

Pulsar-MP5-Relay-Module-FIG-1 (2)

WEEE Label

According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste.

CONTACT

Documents / Resources

Pulsar MP5 Relay Module [pdf] Instruction Manual
AWZ520, AWZ514, MP5 Relay Module, MP5, Relay Module, Module

References

Leave a comment

Your email address will not be published. Required fields are marked *