Tribit XFree Go Wireless Headphones

Package Contents

• 1x Tribit XFree Go Wireless Headphones
• 1x Protective Case
• 1x Micro USB Cable
• 1x 3.5mm Audio Cable
• 1x User Manual

Product Diagram

The headphones feature several controls and ports:

• Top View:
• Microphone
• LED Indicator
• Micro USB Charging Port
• Volume + / Next Track button
• MFB (Multi-Function Button)
• Volume - / Previous Track button
• Bottom View:
• 3.5mm Audio Input

Getting Started

Turn On / Off

1. To power on: Press and hold the MFB button for 2 seconds. The LED indicator will flash blue for 1 second.
2. To power off: Press and hold the MFB button for 4 seconds. The LED indicator will flash red for 1 second and then turn off.

Bluetooth Connection

1. Press and hold the MFB button for 5 seconds until the LED indicator flashes blue. The indicator will then flash red and blue alternately, indicating pairing mode.
2. Activate Bluetooth on your phone, search for devices, and select "Tribit XFree Go" from the pairing list to connect.

Connect with Two Devices Simultaneously

1. Follow the Bluetooth Connection instructions to pair with Device A.
2. Disable Bluetooth on Device A.
3. Pair with Device B using the same method.
4. Reactivate Bluetooth on Device A and select "Tribit XFree Go" in the pairing list.
5. You can now make and receive calls from either paired device.

Operation of Buttons

Voice Prompts

Charge the Headphones

Connect the USB end of the provided charging cable to a 5V power outlet (power adapter is not included). Connect the Micro USB end into the headphones. The LED indicator will glow red during the charging process, then change into green after being fully charged (within 3 hours).

Customer Service

The headphones have a full 18-month warranty against manufacturing defects starting from the purchase date. For FAQs and more information, please email to support@tribitaudio.com.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.