Instructions for Shenzhen Zbaitu Technology models including: ZBT-3737O, ZBT3737O, 2A3DI-ZBT-3737O, 2A3DIZBT3737O, ZBT-3737O Laser Engraver, Laser Engraver, Engraver
Shenzhen zbaitu Technology Co.,Ltd ZBT-3737O Laser Engraver 2A3DI-ZBT-3737O 2A3DIZBT3737O zbt 3737o
File Info : application/pdf, 20 Pages, 1.80MB
DocumentDocumentZBT_3737O instructions Summary
1. Frame description
X-axis motor Lifting frame
Laser module
USB interface
Y-axis motor Power interface SD card slot
Y-axis motor
Power interface: connect the power supply to supply power to the machine USB interface: connect the computer to transmit data and control the machine through
the computer SD card slot: store gcode code to complete offline engraving XY-axis motor: control the precise movement of the laser to complete the engraving Lifting frame: adjust the distance between the laser module and the carved object to
achieve the best focal length Laser module: emit laser for engraving or cutting
2. Accessories list
Parts
description USB data cableTo connect to the machine through a computer, connect one end of the USB data cable to the USB port of the machine, and the other end to the USB port of the computer.
12V-5A Power AdapterTo use the machine, connect the adapter to the machine's power interface, connect the plug to the adapter, and insert the adapter into an AC power outlet.
protection goggleDo not look directly at the laser while the engraving machine is working. If you want to observe the engraving situation and process, please wear protective glasses
SD card + SD card reader: used for offline engraving
Assemble the machine
1. parts list
parts
name L-shaped groove
specifications corner
quantity 4
Screw the nut by M5
8
hand
screw
M5*10
10
Corner slot nut
M5
1
screw
M3*8
2
Stainless steel gasket M5*14*1
4
2. Assembly steps
1. Assemble Y-axis slider
2. Column integral frame 3. Install the support feet
4. Wear the timing belt 5. Fixed timing belt (pay attention to belt tightness)
6. Clip YR shaft wire into profile groove 7. Install laser line and X axis
8. Install and fix x and y axis wires
9. Install the laser module and connect the laser module to the motherboard
11. fix the x-axis screw
2. Connect the software
Connection mode 1 (wired):
1. Turn on the machine power
2. Connect one end of the data cable provided by us to the USB port of the machine and the
other end to the USB port of the computer 3. Open the computer operating software and click the connect button to connect
Connection mode 2 (Bluetooth):
1. Turn on the machine power 2. Open the WIFI connection list of mobile phone or computer 3. Select the network "GRBL_ESP", password: 123456789. (please disconnect the wired
network for PC), and wait for the network connection 4. Then open the browser and enter the IP address of the controller ("192.168.0.1" in the
example) in the address bar to open the Web control interface 5. Set the parameters as shown below
a) Set the broadcast mode bit -Bluetooth 4. After the setup is completed, restart 5. Turn on the computer, look for bluetooth btgrblesp, and connect. 6. Open the operating software, select the corresponding serial port and click the connect button
to connect
Connection mode 3(WIFI_AP mode):
1. Turn on the machine power 2. Open the WIFI connection list of mobile phone or computer 3. Select the network "GRBL_ESP", password: 12345678. (please disconnect the wired
network for PC), and wait for the network connection 4. Then open the browser and enter the IP address of the controller ("192.168.0.1" in the
example) in the address bar to open the Web control interface
Link mode 4(WIFI_STA mode):
1. Turn on the machine power 2. Open the WIFI connection list of mobile phone or computer 3. Select the network "GRBL_ESP", password: 12345678. (please disconnect the wired
network for PC), and wait for the network connection 4. Then open the browser and enter the IP address of the controller ("192.168.0.1" in the
example) in the address bar to open the Web control interface 5. Set the parameters as shown below
a) Set WiFi name b) Set WiFi password c) Set that address of the control panel in the same segment of the route d) Set Telnet parameters 6. After the setting is completed, restart, then open the browser and enter the IP address of the controller in the address bar ("192.168.31.127" in the example) to open the Web control interface
Third, matters needing attention
1. safety matters
1. It is forbidden to directly irradiate the eyes of human beings or animals, otherwise it will cause harm to the eyes!
2. Do not irradiate human body, animals, clothes, valuables, etc., otherwise it will cause injury or damage!
3. It is forbidden to be used by children or people who have no ability to operate! 4. It is forbidden to use in places with inflammable and explosive articles or combustible gases,
so as to avoid fire or explosion! 5. It is forbidden to look directly at the laser focus when engraving the machine. If you need to
observe, please wear protective glasses! 6. Never look at the laser focus for a long time, otherwise it will affect your eyesight! 7. Please turn off the power when not using the machine.
2. Carving instructions
1. Pay attention to the accuracy of focal length before carving!
a) 30W, 40W-PRO adjustable focus module, the distance between the lens and the sculpture is 20-40 mm.
b) The distance between the 40W-PRO fixed-focus 20mm lens and the carving object is 20mm, so this module can be carved well
c) The distance between 40W-PRO fixed-focus 40mm lens and engraving is 40mm, so this module can cut well
d) The distance between 80W fixed-focus 45mm lens and engraving is 45mm, and this module is the best for cutting
2. In theory, the machine can work for a long time, but in order to better protect the laser head and prolong its service life, it is recommended to work for 2 hours and rest for 2 minutes
3. If you have any questions, you can contact customer service (), or you can contact us by email on the website "".Contact informationcontact us
IV. Maintenance
1. Do not use the machine in damp/hot places. 2. Do not touch and operate the machine with wet hands. 3. Please wipe the lens of the machine regularly with a cotton swab dipped in alcohol to protect
the lens.
V. Contact us
1. Enterprise name: ZBAITU 2. Address: Room 501, Building C, Boxing Industrial Zone, Gongye West Road, Minzhi Street,
Longhua District, Shenzhen 3. Emailzbaitu@zbaitu-tech.com
appendix
TSLD40W_XX_PRO
Material Plywood 5mm Plywood 8mm Plywood 18mm MDF board 5mm MDF board 8mm
Marking
Craving
Cutting ×
MDF board 18mm
×
Balsa 8mm
Hard wood 18mm
×
Acrylic 8mm(Dark Color)
Brushed Acrylic(Transparent)
×
×
Corrugated cardboard < 8mm
Kraft Paper 0.5mm
Paperboard 2mm
Weeding invitation paper 0.5mm
Colored A4 Paper(Not White)
A4 Paper(White)
×
×
Spray art stencils from mylar sheets(<1mm) ×
×
Heat transfer vinyl
×
×
bamboo
Stamp rubber
Non-woven
×
Cotton
×
Linen
×
Velvet
×
Canvas
×
Fabric polyester
×
Fabric synthetics
×
Leather < 2mm
Leather < 4mm
Plastic
PPR
×
ABS Sheets 2mm(Dark Color)
PVC Sheets 2mm(Dark Color)
Brushed PVC Transparent board
×
×
Black foamex(EPE)
KT Board
×
×
EVA foam
Bakelite
×
Brushed Glass
×
×
Cobblestone
×
×
Brushed Ceramic
×
×
Printed Metal
×
×
PCB borad
×
×
Anodized Aluminium
×
×
Brushed Stainless Steel
×
×
Mirror Stainless Steel
×
×
Gold
×
×
×
TSLD80W_FF45_PRO
Material Plywood 5mm Plywood 8mm Plywood 18mm MDF board 5mm MDF board 8mm MDF board 18mm Balsa 8mm Hard wood 18mm Acrylic 8mm(Dark Color) Brushed Acrylic(Transparent) Corrugated cardboard < 8mm Kraft Paper 0.5mm Paperboard 2mm Weeding invitation paper 0.5mm Colored A4 Paper(Not White) A4 Paper(White) Spray art stencils from mylar sheets(<1mm) Heat transfer vinyl bamboo Stamp rubber Non-woven Cotton Linen Velvet Canvas Fabric polyester Fabric synthetics Leather < 2mm Leather < 4mm Plastic PPR ABS Sheets 2mm(Dark Color) PVC Sheets 2mm(Dark Color) Brushed PVC Transparent board Black foamex(EPE) KT Board EVA foam
Marking × × × ×
Craving × × × × × × × × × × × × ×
Cutting × × ×
Bakelite Brushed Glass Cobblestone Brushed Ceramic Printed Metal PCB borad Anodized Aluminium Brushed Stainless Steel Mirror Stainless Steel Gold
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
Material Plywood 2mm Plywood 3mm Plywood 4mm Plywood 5mm Plywood 8mm Plywood 18mm Bitch ply 3mm MDF board 3mm MDF board 5mm MDF board 8mm Black acrylic plate 3mm Black acrylic plate 3mm
Cutting Speed
TSLD40W_XX_PRO 160mm/minS1000,1Pass
TSLD80W_FF45_PRO 480mm/minS1000,1Pass
120mm/minS1000,1Pass
480mm/minS1000,1Pass
100mm/minS1000,1Pass
480mm/minS1000,1Pass
120mm/minS1000,2Pass
480mm/minS1000,1Pass
120mm/minS1000,3Pass
480mm/minS1000,1Pass
120mm/minS1000,8Pass
480mm/minS1000,3Pass
240mm/minS1000,1Pass
480mm/minS1000,1Pass
120mm/minS1000,2Pass
480mm/minS1000,1Pass
120mm/minS1000,4Pass
120mm/minS1000,2Pass
120mm/minS1000,5Pass
120mm/minS1000,3Pass
120mm/minS1000,2Pass
120mm/minS1000,1Pass
120mm/minS1000,4Pass
120mm/minS1000,2Pass
* unpainted glass and ceramics Laser printing paper is needed to assist engraving
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ·Reorient or relocate the receiving antenna. ·Increase the separation between the equipment and receiver. ·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ·Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement To comply with FCC RF exposure compliance requirements, this grant is applicable to onl y mobile configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be colocated or operating in conjunction with any other antenna or transmitter.
Microsoft: Print To PDF