Hollyland - Wireless Lavalier Microphone | Video Transmitter | Intercom System
User Manual for HOLLYLAND models including: M2 Duo Lightning, M2 Duo USB-C, M2 Duo Camera, M2 Combo, LARK M2 Wireless Lavalier Microphone, LARK M2, Wireless Lavalier Microphone, Lavalier Microphone
Hollyland LARK M2 COMBO-AU | Bayview Technology
File Info : application/pdf, 24 Pages, 2.51MB
DocumentDocumentLARK M2 User Manual V1.0 Version Overview LARK M2 Duo (Lightning) LARK M2 Duo (USB-C) EN-1 Version Overview LARK M2 Duo (Camera) EN-2 Version Overview LARK M2 Combo * The quantity of the items depends on the product configuration. EN-3 Product Overview Mobile Version TX1 Camera Version RX EN-4 TX2 RX (USB-C/Lightning) Charging Case TX1 TX2 Charging Case Product Overview TX: Transmitter Built-in Microphone Status Indicator Power/Noise Cancellation/ Pairing Button Mobile Version RX: Receiver (Lightning/USB-C) Clip Magnet Charging Contacts USB-C Port TX1 Status Indicator TX2 Status Indicator EN-5 Noise Cancellation/ Pairing Button *The plug has Lightning and USB-C versions Product Overview Camera Version RX: Receiver USB-C Port Power Button Mode Switching/ Pairing Button Status Indicator Volume Knob 3.5mm Audio Output Jack Back Clip Volume/Mode Indicator Charging Contacts EN-6 Product Usage (Mobile Version) The preferred placement for TX is at the collar. If speaking with a loud volume, you can choose an upper chest position. You can wear it using either the back clip or clip magnet. a. Place the clip magnet on the back of the collar, and secure TX on the front of the collar with the magnet. b. Clip the back clip onto the collar, and secure TX with the clip. EN-7 Product Usage (Mobile Version) A magnet necklace for the clip magnet is included, allowing you to secure TX around your neck. * In order to achieve the best possible sound quality during recording, it's important to place the TX correctly. Make sure that the microphone is not covered by any cloth. If you are recording outdoors, it's recommended to use a windscreen to minimize unwanted noise caused by the wind and breathing sounds. EN-8 Product Usage (Mobile Version) Plug RX (Lightning) into phone Plug RX (USB-C) into phone EN-9 Product Usage (Mobile Version) Charge your phone through the RX for simultaneous charging and usage EN-10 Product Usage (Camera Version) Connect RX to camera 1. Attach the RX to the camera's hot shoe/cold shoe using the back clip; 2. Connect the RX's 3.5mm audio output port to the camera's 3.5mm audio input port using a 3.5mm TRS to TRS cable; 3. Set the camera's recording volume to the minimum level and the receiver's output volume to the medium level to ensure best recording quality. EN-11 Indicator Description TX Indicator Lights Description Blue light flashing Blue light steady Green light steady (in use) Pink light steady Orange light steady Green light steady (while charging) Red light flashing slowly Mobile Version RX Indicator Lights Description Blue light flashing Blue light steady Green light steady (in use) Pink light steady Red light flashing slowly Camera Version RX Indicator Lights Description Blue status indicator light flashing Blue status indicator light steady Status TX and RX not connected TX and RX connected Noise Cancellation ON TX updating TX charging TX fully charged TX low battery Status TX and RX not connected TX and RX connected Noise Cancellation ON RX updating TX low battery Status TX and RX not connected TX and RX connected EN-12 Indicator Description Green status indicator light steady (in use) Pink status indicator light steady Orange status indicator light steady Green status indicator light steady (while charging) Red status indicator light flashing slowly Two red status indicator lights flashing quickly Blue volume/mode indicator light steady Green volume/mode indicator light steady One volume/mode indicator light steady Two volume/mode indicator lights steady Three volume/mode indicator lights steady Charging Case Indicator Lights One LED ON Two LEDs ON Three LEDs ON Four LEDs ON One LED ON, steady red One flashing LED when connected via USB Four LEDs sequence on Noise Cancellation ON RX updating RX charging RX fully charged TX low battery RX low battery Stereo Mono Low volume Medium volume High volume 25% battery 50% battery 75% battery 100% battery Low battery level and cannot charge the RX and TX Charging Charging case updated EN-13 Product Usage Automatic On/Off Take the TX and RX out from the charging case to turn on automatically. Place the TX and RX back in the charging case to turn off automatically. Manual On/Off Press and hold the TX power button, or the Camera Version RX power button for 3 seconds to turn on/off. Press and hold the TX power button for 3 seconds Press and hold the RX power button for 3 seconds EN-14 Product Usage Noise Cancellation 1. Press the noise-cancellation button on TX to turn the function on or off. When noise cancellation is on, the status indicator on TX turns green. Manual Pairing 1. With the TX off, press and hold the TX pairing button for 6 seconds to start pairing. The TX status light will quickly flash blue when in pairing. 2. Press the noise-cancellation button on the mobile version RX to turn the function on or off. When noise cancellation is on, the status indicator on the RX turns green. 2. For mobile version RX, connect it to a phone and hold the pairing button for 3 seconds to start pairing. The RX status light will quickly flash blue when in pairing. EN-15 Product Usage 3. With the camera version RX on, hold the pairing button for 3 seconds to start pairing. Manual Charging When the status indicator on TX turns into slow flashing red, you can charge the TX using the magnetic charger. Solid orange indicates charging in progress. Solid Green indicates charging completed and the light will go off 30 minutes later. * The TX and the RX are pre-paired at the factory. Automatic Charging When the status indicator on TX turns into slow flashing red, or when both status indicators on RX turn into fast flashing red, place them in the charging case and they will start charging automatically. Solid orange indicates charging in progress. Solid Green indicates charging completed. When both status indicators on the camera version RX turn into fast flashing red, you can charge the RX using the charging cable. Solid orange indicates charging in progress. Solid Green indicates charging completed and the light will go off 30 minutes later. EN-16 Product Usage Video Recording Control While shooting with your phone, double-press the button on TX to start or stop video recording. Mode Switching (Camera Version RX Only) Connected to a phone: The green light stays on. Only support mono mode. Connected to a camera: The blue light stays on, indicating stereo mode; the green light stays on, indicating mono mode. To switch mode, simply press the mode switching button on the RX. * This function only works when the camera app of your phone supports the function of controlling video recording by pressing the volume key. EN-17 Product Usage Volume Lock (Camera Version RX Only) To lock the current volume level on the Camera Version RX, simply double-click the power button. If you need to adjust the volume again, double-click the power button once more to release the volume lock. Note: Turn the volume knob clockwise to turn the volume up. Turn the volume knob counterclockwise to turn the volume down. 1. The mobile version only supports mono mode. 2. Only pair one RX to the TX during recording to ensure proper operation of the LARK M2 combo version. Volume Adjustment (Camera Version RX Only) The factory default volume is set at medium level, with three levels available: high, medium, and low. Firmware Update Mobile Version: Update via the Lark Sound app. Camera Version: Update via the Lark Sound app or from Hollyland official website. EN-18 App Information Lark Sound The Lark Sound app is available for download on Xiaomi, Huawei, and Apple App Stores. You can also scan the QR code below to download the app. Lark Sound The Lark Sound app is a perfect match for Hollyland wireless microphones. With the app, you'll have access to a range of smart features, such as parameter configurations and firmware updates, that work together seamlessly to enhance your microphone performance. Requires iOS 12.0 or higher Requires Android 8.0 or higher EN-19 Specifications Mic Sensitivity Wireless Modulation Mode Wireless Transmission Transmission Range Mic Polar Pattern Frequency Response Signal-to-Noise Ratio Sound Pressure Level Bit Depth Sample Rate Battery Voltage Battery Capacity -37 dBV ± 2dB @ 1 KHz, 94dB SPL GFSK 2 Mbps 2.4 GHz Adaptive Frequency Hopping (AFH) Mobile Version: Up to 1000ft (300m) for LOS/200ft (60m) for NLOS Camera Version: Up to 1000ft (300m) for LOS/130ft (40m) for NLOS Omnidirectional 20 Hz20 kHz > 70dB 115dB SPL 24-bit 48kHz TX: 3.87V Camera Version RX: 3.87V Mobile Version Charging Case: 3.8V Camera Version Charging Case: 3.8V TX: 97 mAh Camera Version RX: 145 mAh Mobile Version Charging Case: 750 mAh Camera Version Charging Case: 1950 mAh EN-20 Specifications Operating Time TX: About 10 hours Camera Version RX: About 9 hours Mobile Version Charging Case: > 2 times charging for 2 TX at the same time Camera Version Charging Case: > 3 times charging for all TX and RX at the same time Charging Time TX: About 1.5 hours Camera Version RX: About 1.5 hours Mobile Version Charging Case: < 1.5 hours Camera Version Charging Case: < 2 hours Charging Temperature 0° C to 45° C Operating Temperature 10° C to 45° C Dimensions TX: Approx. D26mm x 9.9mm (1.0" x 0.4") Mobile Version RX: Approx. 40mm x 16.5mm x 9mm (1.6" x 0.6" x 0.4") Camera Version RX: Approx. 40mm x 25.7mm x 20.5mm (1.6" x 1.0" x 0.8") Mobile Version Charging Case: Approx. 75.8mm x 49.8mm x 35mm (3.0" x 2.0" x 1.4") Camera Version Charging Case: Approx. 86mm x 54mm x 39mm (3.4" x 2.1" x 1.5") TX: Approx. 9g (0.3oz) Mobile Version RX: Approx. 6g (0.2oz) Weight Camera Version RX: Approx. 14.8g (0.5oz) Mobile Version Charging Case: Approx. 65.6g (2.3oz) Camera Version Charging Case: Approx. 111g (3.9oz) * The data provided above is based on laboratory testing results. EN-21 Support If you encounter any problems in using the product or need any help, please contact Hollyland Support Team via the following ways: Hollyland User Group HollylandTech HollylandTech HollylandTech support@hollyland.com www.hollyland.com Statement: All copyrights belong to Shenzhen Hollyland Technology Co., Ltd. Without the written approval of Shenzhen Hollyland Technology Co., Ltd., no organization or individual may copy or reproduce part or all of any written or illustrative content and disseminate it in any form. Trademark Statement: All the trademarks are owned by Shenzhen Hollyland Technology Co., Ltd. Note: Due to product version upgrades or other reasons, this User Manual will be updated from time to time. Unless otherwise agreed, this document is provided as a guide for use only. All representations, information, and recommendations in this document do not constitute warranties of any kind, express or implied. EN-22