gofanco Logo

4 HDMI 1.4 Splitter/Extender
Guia do usuáriogofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender

Obrigado por comprar do gofanco. Nossos produtos visam atender a todas as suas necessidades de conectividade, onde quer que você vá. Para obter o melhor desempenho e segurança, leia as instruções cuidadosamente e guarde este Guia do usuário para referência futura. Se precisar de mais informações sobre nossos produtos, visite www.gofanco.com. Para suporte técnico, envie-nos um e-mail para [email protegido]. Para drivers ou downloads manuais, vá para www.gofanco.com/downloads.

Avisos de segurança importantes
Leia as instruções de segurança cuidadosamente antes da instalação e operação.

  • Preste muita atenção a todos os avisos e dicas para este dispositivo
  • Não exponha esta unidade à chuva, umidade pesada ou líquidos
  • Não coloque nenhum item no dispositivo nem tente modificar seu funcionamento
  • Do not repair the device or open the enclosure without professional guidance to avoid electric shocks. Doing so may void your warranty Keep the product in a well- entilated location to avoid damage from overheating
  • Desligue a energia e certifique-se de que o ambiente seja seguro antes da instalação
  • Não conecte os cabos HDMI e os cabos IR na entrada / saída quando o dispositivo estiver em uso para evitar danos ao cabo. Certifique-se de que eles estão conectados às portas corretas
  • Use apenas o adaptador de energia incluso. Certifique-se de que a especificação corresponda ao uso de adaptadores de energia DC de terceiros

Introdução
The 1×4 HDMI 1.4 Splitter/Extender distributes HDMI signals from one source device to four CAT6/7 outputs and one HDMI output (loop out).
Recursos

  • Distributes HDMI signals from one source to four CAT6/7 outputs
  • One HDMI loop-out on the transmitter CAT6/7 outputs: Up to 70m (230ft) at 1080p and 50m (164ft) at 4K
  • Compatível com HDMI 1.4 e HDCP 1.4
  • Suporta até [email protegido] YUV 4:4:4, 1080p @60Hz YUV 4:4:4
  • Supports Power over Cable (PoC), bi-directional IR control, audio extraction, and firmware upgradeable
  • Latência quase zero
  • Lightning/Surge/ESD protection Installation Requirements
  • Dispositivos de origem HDMI (DVD player, decodificador, PC, etc.)
  • Monitores HDMI (SDTV / Monitor, HDTV / Monitor, projetor, etc.)
  • Cabos HDMI (não incluídos)
  • CAT cables (not included)

conteúdo do pacote

1×4 HDMI 1.4 Splitter/Extender

  • 1x 1×4 HDMI 1.4 Splitter/Extender
  • 4x CAT6/7 Receivers
  • 5x IR Receiver cables
  • 1x IR Emitter cable
  • 1x Power adapter (24V/2.71A)
  • Acessórios para montagem em superfície
  • 4x Velcro strips
  • 4 x almofadas de plástico
  • 1x guia do usuário

Layout do produtogofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender -

  1.  Power LED: On when the Splitter/Extender is powered on; Off when the Splitter/Extender is powered off
  2. EDID: 3-Pin EDID selector switch
    • 5.1CH Audio: Uses EDID [email protegido] 5.1CH
    • 2.0CH Audio: Uses EDID [email protegido] 2.1CH
    • Copy Display: Uses the EDID of the connected display with the lowest resolution

gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender - fig 1

  1. Entrada HDMI: Conecta-se à sua fonte HDMI
  2. Saídas:
    . HDMI Loopout: Conecta-se a um monitor HDMI local
    . CAT6/7 Out (1-4): Connects to the CAT6/7 In of the CAT6/7 Receivers using a CAT6/7 cable. It supports PoC to power the receiver over a CAT cable. The orange LED illuminates when an HDMI signal is detected. The green LED illuminates when powered on
  3. Entrada de RI: Five 3.5mm IR input jacks for connecting the IR Receivers
    . IR All In: Connects to an IR Receiver cable. Sends IR signals to all CAT6/7 Receivers to control all display devices
    • IR In (1-4): Connects to an IR Receiver cable. Sends IR signals to the respective CAT6/7 Receiver to control the display device
  4. Ao controle:
    • IR Out: Connects to an IR Emitter cable. Receives IR signals from the CAT6/7 Receivers to control the source device
    • FW: USB Type-A port for firmware update
  5. Saída de áudio:
    • S/PDIF Out: Toslink output for audio de-embedding from the HDMI output
    • L/R Out: RCA analog stereo output for audio de-embedding from the HDMI output
  6. Jack de alimentação: Connects to the included 24V power adapter

gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender - Power Jack

  1. Saída HDMI: Conecta-se a um monitor HDMI
  2. CAT6/7 In: Connects to the CAT6/7 Out of the Splitter/Extender using a CAT6/7 cable. It supports PoC to power the receiver over a CAT cable. The orange LED illuminates when an HDMI signal is detected. The green LED illuminates when powered on
  3. Entrada de RI: Connects to an IR Receiver cable
  4. Saída de IR: Connects to an IR Emitter cable

Instalação de hardware

  1. Desligue todos os dispositivos, incluindo sua fonte HDMI e monitor (es) HDMI.
  2. Connect your HDMI source device to the 1×4 HDMI 1.4 Splitter/Extender’s HDMI In connector with an HDMI cable (HDMI cable not included).
  3. Connect your CAT6/7 cables between the Splitter/ Extender and CAT6/7 Receivers.
  4. Optional: Connect an HDMI display to the HDMI Out connector of the Splitter/Extender using an HDMI cable (HDMI cable not included). This connection is needed only if you require local monitoring of the HDMI signal.
  5. Connect an HDMI display to each CAT6/7 Receiver’s HDMI Out connector with an HDMI cable (HDMI cables not included).
  6. Optional: Connect the IR Receiver cables and the IR Emitter cable to the IR interface ports. This connection is needed only if you need to control your HDMI devices from a remote location. See IR Control, starting on page 9, for proper IR connection.
  7. Plug the included power adapter into the Splitter/ Extender’s Power Jack, then plug the power adapter into a reliable power outlet. Note: The CAT6/7 Receivers do not need power adapters, they can be powered from the Splitter/Extender over CAT cable with PoC technology.
  8. Power on your HDMI source device and HDMI display(s). The Splitter/Extender is ready for use.

Diagrama de Aplicação

The application diagram shows the most typical input and output devices used with the Splitter/Extender.gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender - Diagram

Fiação de cabo CAT
We suggest both RJ-45 connectors be wired identically using the T568B wiring standard for the best performance and compatibility. Both connectors must be wired identically, to the T568B standard.

gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender - fig 2 gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender - fig 3

Observação: You may use cat5e. cat6 UTP (cat6 preferred) in conjunction with the RJ45 output: however for best performance use cat6a or cat7 (particularly in electrically noisy environments). The maximum distances & transmission performance for HDMI and USB may be compromised by cable quality and patch panels. poor termination, wall plates. cable kinks and electrical interferences. Generally, ensure the cat cable is a solid copper core of 23AWG (avoid CCA type). in one straight run (avoid/minimize patches) and avoid close proximity to any noisy electrical sources.
Controle IR
Provides IR control of the connected devices. The IR feature is bi-directional so either the source device or the display device(s) can be remotely controlled. Controlling the Source Device

  1. Connect an IR Emitter Cable to the IR Out port of the Splitter/Extender.
  2. Point the IR Emitter Cable’s IR eye in line with the source device’s IR window.
  3. Connect an IR Receiver Cable to the IR In port on each CAT6/7 Receiver

gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender - Diagra Figure 5: Source Device IR Control Connection Diagram

Controlling the Display Device(s) using IR In
Allows you to remotely control each display individually.

  1.  Connect an IR Receiver Cable to the IR In the port of the Splitter/Extender.
  2. Connect an IR Emitter Cable to the IR Out port on each CAT6/7 Receiver.
  3. Point the IR Emitter Cable’s IR eye in line with the display’s IR window.gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender - IR Emitter

Controlling the Display Device(s) using IR All-In Port
Allows remote controlling of all of the display devices simultaneously.
1. Connect an IR Receiver Cable to the IR All-In port of the Splitter/Extender.
2. Connect an IR Emitter Cable to the IR Out port on each CAT6/7 Receiver.
3. Point the IR Emitter Cable’s IR eye in line with the display’s IR window.gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender - fig 4

Observação:
The IR All In will relay the received IR signal to all the CAT6/7 outputs whereas the IR IN connectors associated with each CAT6/7 output will only relay the IR signal to its respective CAT6/7 Receiver. The Splitter/Extender’s IR Out connector will output the IR signals received from any of the CAT6/7 Receivers, so as to allow control of a source from any of the remote CAT6/7 Receivers.

Perguntas frequentes e solução de problemas

Q: Poor video quality or no video signal on display:
A1: Check whether the HDMI cables are connected properly and are in good working condition.
A2: Make sure the resolution of the display is compatible with the splitter’s resolution
Q: No HDMI signal output from the CAT6/7 connectors while the local HDMI out port is working normally:
A1: Check whether the HDMI cables are connected properly and are in good working condition.
Q: Splash screen on the displays:
A1: Cause of damaged or low-quality HDMI cables. Change to a higher-quality HDMI cable.

Especificações

1×4 HDMI 1.4 Splitter/Extender

Entrada de vídeo
Entrada (1) HDMI
Conector de Entrada (1) Female type A HDMI
Resolução de entrada HDMI Up to 4K©30Hz 4:4:4
Saida de video
saída (1) HDMI; (4) CATx
Conector de saída (1) Female type A HDMI; (4) RJ45
Resolução de saída HDMI Up to 4K©30Hz 4:4:4 8bit.
CATx Output Resolution Up to 4K©30Hz 4:4:4 8bit.
SPDIF Audio Output
Saída de áudio (1) SPDIF
Conector de saída de áudio (1) Toslink
Formato de áudio LPCM 2ch, Dolby Digital 5.1ch, and DTS 5.1ch
Nível de saída ±0.05dBFS
Resposta de Freqüência 20Hz -20kHz, it dB
THD + N < 0.05%, 20Hz -20kHz bandwidth, 1kHz sine at OdBFS level (or max level)
SNR > 90dB, 20Hz -20kHz bandwidth
Isolamento de diafonia > 70dB, 10kHz sine at OdBFS level (or max level before clipping)
Ruído -90dB
Saída de áudio analógica
Saída de áudio (1) Analog audio
Conector de saída de áudio (1) RCA
Formato de áudio PCM 2CH
Resposta de Freqüência 20Hz -20kHz, ±1dB
Nível máximo de saída 2.0Vrms ± 0.5dB.
THD + N < 0.05%, 20Hz -20kHz bandwidth, 1kHz sine at OdBFS level (or max level)
SNR > 80dB, 20Hz -20kHz bandwidth
Isolamento de diafonia > 70 dB, 10kHz sine at OdBFS level (or max level before clipping)
Desvio de nível LR < 0.3 dB, 1kHz sine at OdBFS level (or max level before clipping)
Capacidade de carga de saída 1Kohm and higher (supports 10x paralleled 10kohm loads)
Ruído - 80dB

1×4 HDMI 1.4 Splitter/Extender Cont’d

Controlo
Porta de controle (1) EDIT; (4) IR IN; (1) IR ALL IN; (1) IR OUT; (1); FW
Conector de controle (1) 3-pin DIP switch; (6) 3.5mm mini jacks; (1) USB-A port
Geral
Padrão HDMI HDMI 1.4 with HDCP 1.4
Modo de transmissão CAT5e/6/7 Cable
Distância de transmissão 1080p s 230 feet (70 meters), 4K 5164 feet (50 meters)
Temperatura de operação -5 to +55t (+23° to +131°F)
Temperatura de armazenamento -25 to +70*C (-13° to +158°F)
Umidade Relativa 10% a 90%, sem condensação
Alimentação de entrada do adaptador AC 100V-240V AC, 50/60Hz
Potência de entrada 24V DC 2.71A
Consumo de energia 15W (Máx.)
Dimensão (W * H * D) 168mm x 44mm x 100mm
Peso líquido 585g

CAT6/7 Receiver

Conversor de vídeo
Entrada (1) CATx
Conector de Entrada (1) RJ45
Resolução de entrada Up to 4K©30Hz 4:4:4 8bit
saída (1) HDMI
Conector de saída (1) HDMI fêmea Tipo A
Resolução de saída Up to 4K©30Hz 4:4:4 8bit
Controlo
Parte de Controle (1)IR In, (1) IR Out
Conector de controle (2)3.5mm mini jacks
Geral
Padrão HDMI HDMI 1.4 with HDCP 1.4
Distância de transmissão 1080p 5230 feet (70 meters), 4K 5164 feet (50 meters)
Temperatura de operação -5— +55°C
Temperatura de armazenamento -25 - +70°C
Umidade Relativa 10% -90%

Aviso Legal
The product name and brand name may be registered trademarks of related manufacturers. TM and ® may be omitted from the user’s guide. The pictures on the user’s guide are just for reference, and there may be some slight differences with the actual products. We reserve the right to make changes without prior notice to a product or system described herein to improve reliability, function, or design.

gofanco Logo Obrigado por escolher o gofanco
www.gofanco.com

Documentos / Recursos

gofanco HDExt4P-HD14 1x4 HDMI 1.4 Splitter Extender [pdf] Guia do usuário
HDExt4P-HD14, 1x4 HDMI 1.4 Splitter Extender, Splitter Extender, HDExt4P-HD14, Extender

Deixe um comentário

O seu endereço de e-mail não será publicado.