Manual do Usuário do Transmissor de Rádio HotRC CT-10B de 10 Canais e do Receptor PWM F-10A de 2.4 GHz e 10 Canais

1. Introdução

This manual provides detailed instructions for the setup, operation, and maintenance of your HotRC CT-10B 10 Channel Radio Transmitter and F-10A 2.4GHz 10CH PWM Receiver. Please read this manual thoroughly before using the product to ensure proper function and safety.

The HotRC CT-10B system is designed for controlling various remote-controlled models, including cars, boats, and tanks, offering a reliable 2.4GHz communication link with advanced features.

2. Conteúdo da embalagem

Verifique se todos os itens listados abaixo estão incluídos em seu pacote:

• 1x CT-10B 10CH Transmitter
• 1x F-10A Receiver
• 1x Cabo de carregamento
• 1x voltage Cable (for feedback)
• 1x Manual de Instruções (este documento)

Image: Standard package contents including the transmitter, receiver, cables, and manual.

3. Produto acabadoview

The HotRC CT-10B transmitter features a compact design with a 2.4-inch color screen for real-time parameter display and adjustment. The F-10A receiver provides 10 channels and supports feedback functions.

Image: The HotRC CT-10B 10-channel radio transmitter shown alongside the F-10A receiver.

3.1 Transmitter Components

Image: Detailed diagram illustrating the various components and functions of the CT-10B transmitter, including the charging port, built-in antenna, VRB, VRA, SWB, SWA switches, direction joystick, one-handed control, throttle trigger, and 18650 battery compartment.

Os principais componentes incluem:

• Porta de carregamento: USB port for charging the internal 18650 battery.
• Antena Embutida: Integrated 2.4GHz antenna for signal transmission.
• VRB / VRA: Rotary potentiometers for auxiliary channel control.
• SWB / SWA: Two-position switches for auxiliary channel control.
• Direction Joystick: For steering control.
• Acionador do acelerador: For throttle control (forward/reverse).
• 18650. Compartimento da bateria: Houses the single 18650 battery (user-supplied).
• Operation Panel / Channel Buttons (A, B, C, D): Botões programáveis ​​para diversas funções.
• Scroll Wheel Button: Utilizado para navegação e seleção em menus.
• Botão de energia: Long press to turn on/off, short press for return/exit.

3.2 Interface de exibição

The 2.4-inch color screen provides real-time information and access to settings. Key indicators and functions on the display include:

• Número do modelo: Current model profile.
• RX V (Receiver Voltage): Real-time receiver battery voltagfeedback.
• RSSI (Received Signal Strength Indicator): Indica a intensidade do sinal.
• TX V (Transmitter Voltage): Real-time transmitter battery voltage.
• Intensidade do sinal: Visual indicator of signal quality.
• Controle Remoto Voltage: Volume da bateria do transmissortage.
• Channels (CH1-CH10): Displays current values and settings for each channel.
• Temporizador: For timing functions.
• Modo Coach: Indicates if trainer mode is active.
• Constant Speed Function: Indica se o controle de cruzeiro está ativo.
• Função de bloqueio: Status of channel locking.
• Comentários Vol.tage: Volume do receptortagfeedback.
• Direction Travel: Steering travel adjustment.
• Throttle Travel: Throttle travel adjustment.
• Giroscópio: Gyro stabilization settings (if applicable with compatible receiver).

4. Especificações

Note: Remote control distance is for reference only, and actual use may vary depending on different environments.

5. Configuração

5.1 Instalação da Bateria do Transmissor

1. Locate the battery compartment on the handle of the CT-10B transmitter.
2. Abra a tampa do compartimento da bateria.
3. Insert one 18650 battery (not included) into the compartment, ensuring correct polarity.
4. Feche bem a tampa do compartimento da bateria.

The transmitter supports charging via the USB port using the provided charging cable. Connect the charging cable to the transmitter's charging port and a suitable USB power source.

5.2 Conexão do Receptor

Connect the F-10A receiver to your model's electronic speed controller (ESC), servos, and other components according to your model's specific wiring diagram. Ensure correct polarity for all connections.

• Connect the ESC to Channel 2 (throttle).
• Connect the steering servo to Channel 1.
• Connect other servos or accessories to Channels 3-10 as required.
• If using the feedback function, connect the provided voltage cable to the receiver's feedback port and to the main battery of your model.

5.3 Emparelhamento do transmissor e do receptor

The CT-10B transmitter and F-10A receiver are typically pre-bound from the factory. If re-binding is necessary or if you are using a new receiver, follow these steps:

1. Certifique-se de que tanto o transmissor quanto o receptor estejam desligados.
2. Connect a bind plug (not included, usually comes with the receiver or ESC) to the BIND/VCC port on the F-10A receiver.
3. Power on the receiver. The receiver's LED should flash rapidly, indicating it is in binding mode.
4. While holding down the BIND button on the CT-10B transmitter (refer to the diagram for location, usually near the power button or on the side), power on the transmitter.
5. The transmitter's screen should display a binding progress or confirmation message. The receiver's LED should turn solid, indicating successful binding.
6. Power off both the transmitter and receiver.
7. Remova o plugue de ligação do receptor.
8. Power on the transmitter first, then the receiver. Verify that the controls respond correctly.

6. Operação

6.1 Ligar/Desligar

• Para ligar: Long press the Power button on the transmitter until the screen illuminates.
• Para desligar: Long press the Power button until the screen shuts down.

6.2 Controles Básicos

• Direção: Use the direction joystick (steering wheel) to control the left/right movement of your model.
• Acelerador: Use the throttle trigger to control forward and reverse movement. Pull the trigger for forward, push for reverse/brake.
• Auxiliary Channels: Use the VRB, VRA potentiometers and SWB, SWA switches to control auxiliary functions on your model, such as lights, winches, or gear shifts, depending on your model's setup.

6.3 Navegação e configurações do menu

The CT-10B features a user-friendly interface for adjusting parameters. Use the scroll wheel button and the A, B, C, D buttons to navigate and modify settings.

• Scroll Wheel Button: Gire para percorrer as opções do menu. Pressione para selecionar uma opção ou confirmar uma configuração.
• Power Button (Short Press): Acts as a "Return" or "Exit" button in menus.
• Botões A, B, C, D: These are programmable buttons. Their functions may vary depending on the selected menu or model profile. Refer to the on-screen prompts for their current assignments.

The UI allows for real-time adjustment of parameters such as channel endpoints, sub-trim, reverse, and mixing functions. The screen displays real-time feedback like receiver voltage and signal strength.

6.4 Funções Avançadas

• Função de treinamento: The CT-10B supports a trainer mode, allowing two transmitters to control one model. This is ideal for teaching new users. A data connection line (not included) is required to link two CT-10B transmitters.
• Speed Cruise Function: Enables a constant speed setting for your model, reducing the need for continuous throttle input. Activate and adjust via the menu.
• Fail-Safe Function: Configures the receiver to move servos to a pre-set position (e.g., throttle to neutral, steering straight) in case of signal loss, preventing runaway models. Set fail-safe positions through the transmitter menu.
• Receiver Feedback Function: The F-10A receiver can transmit battery voltage and signal strength back to the transmitter, displayed on the screen. The feedback alarm voltage can be set in the transmitter's menu.
• Gyro Stabilization: For models requiring gyro stabilization, pair the CT-10B with a compatible receiver like the F-08AT (sold separately) for enhanced handling.

7. Manutenção

• Limpeza: Use um pano macio e seco para limpar o transmissor e o receptor. Evite usar solventes ou produtos de limpeza abrasivos.
• Armazenar: Store the product in a cool, dry place away from direct sunlight and extreme temperatures. Remove the 18650 battery from the transmitter if storing for extended periods.
• Cuidados com a bateria: Ensure the 18650 battery is charged regularly, even during storage, to maintain its lifespan. Do not overcharge or deep discharge the battery.
• Atualizações de firmware: Verifique o fabricante website para quaisquer atualizações de firmware disponíveis para melhor desempenho ou novos recursos.

8. Solução De Problemas

• Sem energia no transmissor:
  • Ensure the 18650 battery is correctly installed with proper polarity.
  • Check if the battery is charged. Connect the charging cable and attempt to power on.
• Nenhuma resposta de controle do modelo:
  • Verify that the transmitter and receiver are properly bound. Re-bind if necessary (refer to Section 5.3).
  • Check all connections between the receiver, ESC, and servos.
  • Certifique-se de que tanto o transmissor quanto o receptor estejam ligados.
  • Check the receiver's LED indicator; it should be solid after binding.
  • Confirm the model's battery is charged and connected.
• Short Control Range or Signal Interference:
  • Ensure the transmitter antenna is not obstructed.
  • Avoid operating in areas with strong electromagnetic interference.
  • Verifique se há obstruções físicas entre o transmissor e o receptor.
  • Ensure the receiver antenna is properly positioned and not damaged.
• Incorrect Channel Response:
  • Check channel assignments and reverse settings in the transmitter menu.
  • Ensure servos are connected to the correct receiver ports.

Caso encontre algum problema não abordado aqui, entre em contato com o suporte ao cliente.

9. Informações de segurança

To ensure safe operation and prevent damage to the product or injury, please observe the following safety guidelines:

• Sempre opere seu modelo de RC em uma área segura e aberta, longe de pessoas, animais de estimação e obstáculos.
• Never operate your RC model near public roads, power lines, or water bodies.
• Ensure the transmitter is powered on before powering on the receiver in your model. Power off the receiver before powering off the transmitter.
• Regularly inspect all components for damage. Do not use damaged equipment.
• Keep batteries away from heat sources and direct sunlight. Do not puncture or disassemble batteries.
• Recomenda-se a supervisão de um adulto para usuários menores de 16 anos.
• Não modifique o produto de nenhuma forma que não esteja especificada neste manual.

10. Suporte ao cliente

For any questions, technical assistance, or support regarding your HotRC CT-10B system, please contact the manufacturer or your retailer. Efficient and professional after-sales service is available to ensure a satisfactory experience.

Manufacturer: Xiangtat