Seauto Cordless Robotic Pool Cleaner SEAUTO-UFO Instruction Manual

1. Introdução

Thank you for choosing the Seauto Cordless Robotic Pool Cleaner, Model SEAUTO-UFO. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new pool cleaner. Please read this manual thoroughly before initial use and retain it for future reference.

2. Informações de segurança

AVISO: Leia todos os avisos e instruções de segurança antes de usar este aparelho. O não cumprimento dos avisos e instruções pode resultar em choque elétrico, incêndio e/ou ferimentos graves.

• Certifique-se de que a porta de carregamento esteja seca antes de conectar o carregador.
• Não utilize o aspirador se o cabo de alimentação ou o carregador estiverem danificados.
• Keep children and pets away from the pool area when the cleaner is in operation or charging.
• Only use the original charger provided by the manufacturer.
• Do not use the cleaner to remove large debris such as leaves, branches, or rocks, as this may damage the unit. Manually remove large debris before operating the cleaner.
• Retire o aspirador da piscina após cada ciclo de limpeza e antes de o carregar.
• Quando não estiver em uso, guarde o produto de limpeza em local fresco e seco, longe da luz solar direta.

3. Conteúdo da embalagem

Verifique se todos os itens estão presentes na embalagem:

• 1 x Seauto G900 Pool Cleaner (Model SEAUTO-UFO)
• 1 x Gancho de Recuperação
• 1 x adaptador de energia
• 1 x Manual do Usuário (este documento)
• 1 x Filtro

Image: Contents of the Seauto Cordless Robotic Pool Cleaner package.

4. Produto acabadoview

The Seauto Cordless Robotic Pool Cleaner is designed for efficient and autonomous cleaning of various pool types. Its key features include:

• Design sem fio: Eliminates the need for hoses and tangled cords, offering hands-free operation.
• Robust Battery Life: Oferece até 60 minutos de tempo de limpeza com uma única carga.
• Sucção forte: Equipped with 6000Pa suction power to effectively remove debris.
• Automatic Parking: Returns to the pool edge when the battery is low for easy retrieval.

Image: The cordless design of the Seauto pool cleaner in operation.

Image: Battery specifications including capacity, running time, and charging duration.

Image: Depiction of the cleaner's powerful suction capability.

Image: The automatic parking feature of the pool cleaner.

5. Configuração

5.1 Carregamento Inicial

1. Certifique-se de que o aspirador esteja completamente seco antes de carregá-lo.
2. Connect the power adapter to the charging port located on the underside of the cleaner.
3. Conecte o adaptador de alimentação a uma tomada elétrica padrão.
4. Allow approximately 2.3 hours for a full charge. The indicator light will change to confirm charging status.

5.2 Placing in the Pool

1. Once fully charged, ensure the charging port cover is securely closed.
2. Coloque o aspirador cuidadosamente na piscina. Ele afundará até o fundo.
3. Certifique-se de que o aparelho de limpeza esteja completamente submerso antes de iniciar o funcionamento.

6. Instruções de operação

6.1 Iniciando a Operação

• After placing the cleaner in the pool, press the power button (usually located on the top or side) to start the cleaning cycle.
• The cleaner will begin to move across the pool floor, collecting debris.

6.2 Ciclo de limpeza

• The cleaner operates for approximately 60 minutes on a full charge.
• It is designed to clean pool areas up to 645 sq. ft. (60 m²) and pools with a diameter of up to 28.67 ft (8.74 m).
• The cleaner is suitable for flat-bottom pools with a slope of 10° or less, and compatible with various pool shapes, including above-ground and indoor swimming pools.

Image: Maximum cleaning area specifications.

Image: Supported and unsupported pool types for the cleaner.

6.3 Automatic Parking and Retrieval

• When the battery level is low, the cleaner will automatically move to the nearest pool edge.
• Use the provided retrieval hook to carefully lift the cleaner out of the water.
• Always remove the cleaner from the pool after each use to prevent damage and prolong battery life.

7. Manutenção

7.1 Limpando o Filtro

Regularly clean the filter to maintain optimal suction performance.

1. After removing the cleaner from the pool, open the filter compartment.
2. Remova o cesto do filtro.
3. Rinse the filter thoroughly with a garden hose to remove all collected debris.
4. Certifique-se de que o filtro esteja limpo e seco antes de reinseri-lo no aparelho de limpeza.
5. Feche o compartimento do filtro com segurança.

Image: Cleaning the filter with a hose.

7.2 Armazenamento

• After cleaning, ensure the cleaner is completely dry before storing.
• Guarde o produto de limpeza em local fresco e seco, longe da luz solar direta e de temperaturas extremas.
• For long-term storage, it is recommended to charge the battery to approximately 50% every three months to maintain battery health.

8. Solução De Problemas

9. Especificações

10. Garantia e Suporte

10.1 Garantia limitada

The Seauto Cordless Robotic Pool Cleaner comes with a limited warranty. Please refer to the warranty card included in your package for specific terms and conditions. This warranty typically covers manufacturing defects under normal use.

10.2 Suporte ao cliente

For technical assistance, warranty claims, or any questions regarding your Seauto pool cleaner, please contact Seauto customer support through the retailer where the product was purchased or visit the official Seauto website para informações de contato.