Phanteks Revolt 1200W 80PLUS Platinum ATX 3.0 PCIe 5.0 Power Supply Unit Instruction Manual

1. Introdução

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Phanteks Revolt 1200W 80PLUS Platinum Power Supply Unit. Please read this manual thoroughly before installation and retain it for future reference.

The Phanteks Revolt series power supplies are designed for high performance, offering full support for Intel ATX 3.0 specifications and PCIe 5.0, with 80 Plus Platinum efficiency. This unit is sold without cables, allowing users to select custom modular cables (e.g., from CableMod) to suit their specific system requirements.

2. Informações de segurança

AVISO: Improper installation or use can lead to equipment damage, electric shock, or serious injury. Always follow these safety guidelines:

• Ensure the power supply is disconnected from the AC power outlet before installation, removal, or any maintenance.
• Esta fonte de alimentação foi projetada para uso exclusivo em sistemas de computador. Não a utilize para qualquer outra finalidade.
• Não abra a fonte de alimentação. Alto volumetagExistem componentes internos e não há peças que possam ser reparadas pelo usuário. Abrir o aparelho anulará a garantia.
• Instale a fonte de alimentação em uma área bem ventilada, longe de fontes de calor, luz solar direta e umidade.
• Use only approved and compatible modular cables. This power supply unit does not include cables; they must be purchased separately.
• Certifique-se de que todos os conectores estejam firmemente encaixados antes de ligar o sistema.
• Mantenha fora do alcance de crianças.

Recursos de proteção: The Phanteks Revolt power supply includes multiple protection mechanisms to ensure system stability and safety:

• OPP (Overpower Protection): Prevents damage from excessive total power output.
• OVP (Sobre o Vol.tage Proteção): Safeguards components from voltage picos.
• UVP (Sob Vol.tage Proteção): Protege contra volumes insuficientestage entrega.
• SCP (Proteção contra curto-circuito): Previne danos causados ​​por curto-circuito.
• OCP (Proteção contra sobrecorrente): Protects against excessive current on individual rails.
• OTP (Proteção contra superaquecimento): Desliga a unidade se as temperaturas internas ficarem muito altas.
• Proteção sem carga: Ensures stable operation even without a load.
• Reset Protection: Allows the unit to recover safely after a protection event.

3. Conteúdo da embalagem

Verifique se todos os itens estão presentes no seu pacote:

• 1x Phanteks Revolt 1200W Power Supply Unit (Model: PH-P1200PR_BK01C)
• 1x C14 (female) - C13 (male) Power cord (1500mm)
• 1x User’s manual (this document)
• 1x Guia de instalação
• 1x PSU bag
• 1x Zip tie bag
• 1x Pacote de parafusos
• 1x Velcro pack
• 1x PSU tester

Note: Modular cables are NOT included with this power supply unit and must be purchased separately.

4. Produto acabadoview

4.1 Principais Características

• Saída CC de 1200 W: Fornece ample power for high-performance systems.
• 80 PLUS Platinum Certified: Achieves up to 94% efficiency at 50% load, reducing power consumption and heat.
• Compatível com ATX 3.0 e PCIe 5.0: Fully supports the latest Intel ATX 3.0 specifications and includes a 12VHPWR connector for PCIe 5.0 GPUs, delivering up to 600W.
• Design totalmente modular: Allows for custom cable selection and improved cable management. Cables are sold separately.
• Ventoinha de 135 mm com rolamento dinâmico de fluido (FDB): Ensures quiet and efficient cooling with hybrid fan control for silent operation.
• High Peak Power Capability: Designed to handle power peaks up to 235% of its rated output, exceeding industry standards.
• Seasonic Collaboration: Developed with Seasonic to ensure high standards of performance and reliability.

4.2 Physical Dimensions and Components

The Phanteks Revolt 1200W PSU measures 160 mm (L) x 150 mm (W) x 86 mm (H) (6.3 in x 5.9 in x 3.4 in) and weighs 2.26 kg (4.98 lbs).

Frente View (Fan Side)

Modular Cable Connectors

Custom Cable Compatibility

Internal Design (Seasonic Platform)

Important Note: Cables Not Included

Painel traseiro

Revolt Series Comparison

5. Configuração e instalação

Before proceeding, ensure your system is powered off and disconnected from the AC outlet. Refer to your computer case and motherboard manuals for specific installation instructions.

5.1 Preparação para a instalação

1. Reunir componentes: Ensure you have the Phanteks Revolt PSU, your chosen modular cables (not included), mounting screws, and your computer case.
2. Descarga Estática: Ground yourself to prevent electrostatic discharge (ESD) by touching a grounded metal object before handling components.

5.2 Instalação da fonte de alimentação

1. Monte a fonte de alimentação: Carefully slide the Phanteks Revolt PSU into the designated power supply bay in your computer case. Secure it with the provided screws.
2. Conecte cabos modulares: This PSU is fully modular. Connect only the necessary cables to the PSU's modular ports. Refer to the "Modular Cable Connectors" image in Section 4.2 for port identification.
   • Connect the 18+10pin cable to the motherboard.
   • Connect 8pin cables for CPU and PCIe as required by your motherboard and graphics card(s). The 12VHPWR connector is specifically for PCIe 5.0 GPUs.
   • Connect 6pin cables for SATA devices (SSDs, HDDs) and Molex peripherals.
3. Cabos de rota: Route the connected cables neatly through your case for optimal airflow and aesthetics.
4. Conectar aos componentes: Connect the other end of each modular cable to its respective component (motherboard, CPU, GPU, storage drives, etc.). Ensure all connections are firm and secure.
5. Cabo de alimentação CA: Connect the provided C14-C13 AC power cord to the PSU's AC inlet. Do not connect to a wall outlet yet.

6. Instruções de operação

6.1 Inicialização

1. After all internal connections are made and secured, connect the AC power cord from the PSU to a grounded wall outlet or surge protector.
2. Flip the main power switch on the rear of the PSU to the "ON" (I) position.
3. Power on your computer system using the case's power button.

6.2 Hybrid Fan Control

The Phanteks Revolt PSU features a 135mm Fluid Dynamic Bearing fan with hybrid fan control. A switch on the rear panel allows you to toggle between fan modes:

• Hybrid Mode (Default): The fan remains off under low loads for silent operation and only spins up when the power supply reaches a certain temperature or load threshold.
• Modo sempre ligado: The fan operates continuously, providing constant cooling. This mode may result in slightly higher noise levels but ensures maximum cooling performance.

Select the mode that best suits your preference for noise and cooling.

7. Solução De Problemas

If your system does not power on or experiences instability, refer to the following common troubleshooting steps:

• Sem energia:
  • Certifique-se de que o cabo de alimentação CA esteja firmemente conectado tanto à fonte de alimentação quanto à tomada da parede.
  • Verify the main power switch on the PSU is in the "ON" (I) position.
  • Check the wall outlet or surge protector for power. Try a different outlet.
  • Use the included PSU tester to verify if the power supply is functioning independently.
• Instabilidade do sistema/Desligamentos aleatórios:
  • Ensure all modular cables are firmly connected to both the PSU and the components. Loose connections can cause instability.
  • Verify that you are using the correct cables for each component (e.g., CPU power to CPU, PCIe power to GPU).
  • Check for any signs of overheating. Ensure proper airflow within your case.
  • If using the hybrid fan mode, try switching to "Always On" mode to see if it resolves temperature-related issues.
• A ventoinha não está girando:
  • In hybrid fan mode, the fan will not spin under low loads or temperatures. This is normal operation.
  • If the fan does not spin even under load or in "Always On" mode, contact Phanteks support.
• Cheiro de queimado ou fumaça:
  • Immediately disconnect the AC power cord from the wall outlet. Do not attempt to power on the system again.
  • Contact Phanteks support immediately.

For further assistance, please refer to the Phanteks support website ou entre em contato com o atendimento ao cliente.

8. Especificações

9. Garantia e Suporte

9.1 Garantia do Fabricante

The Phanteks Revolt 1200W Power Supply Unit is covered by a Garantia do fabricante de 1 anos A garantia é válida a partir da data da compra e cobre defeitos de materiais e de fabricação sob uso normal. Guarde o comprovante de compra para eventuais solicitações de garantia.

A garantia não cobre danos resultantes de:

• Instalação ou operação inadequada.
• Modificações ou reparos não autorizados.
• Accidental damage, abuse, or misuse.
• Desastres naturais ou causas externas.

Opening the power supply unit will void the warranty.

9.2 Suporte Técnico

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Phanteks webou entre em contato com o suporte ao cliente:

Suporte Phanteks Website

Please have your product model number (PH-P1200PR_BK01C) and proof of purchase ready when contacting support.