CDIYTOOL 4yhujuyj
CDIYTOOL 100A MPPT Solar Charge Controller User Manual
Model: 4yhujuyj
Introdução
This manual provides essential information for the safe and efficient operation of your CDIYTOOL 100A MPPT Solar Charge Controller. This controller is designed for 36V, 48V, and 60V battery systems and features an LCD display, multiple load control modes, and dual USB outputs. Please read this manual thoroughly before installation and use.
The controller automatically adapts to 36V/48V/60V systems and is not suitable for 12V/24V systems. It utilizes innovative MPPT technology for high tracking efficiency, detecting the maximum charging current.
Instruções de segurança
Always adhere to the following safety guidelines to prevent injury and damage to the controller or other components.
- Certifique-se de que a bateria tenha volume suficientetage for the controller to recognize the correct battery type upon first use.
- Connect the battery to the controller first, then connect the solar panels. Reversing this order can damage the controller.
- O volume máximo de entradatage is 50V. Ensure your solar panel configuration does not exceed this limit. For example, a 19V photovoltaic panel matches a 12V battery, and a 38V photovoltaic panel matches a 24V battery. When a 38V panel is connected, the maximum voltage may reach 42V.
- The controller is suitable for various battery types (including open, lead-acid, gel, and lithium batteries). Refer to the controller's settings for specific battery types.
- The controller provides protection against overvoltage, short circuit, overload, overcharge, and over-discharge.
- Não tente desmontar ou reparar o controlador por conta própria. Contate pessoal qualificado para assistência técnica.
Image: Excerpt from the user manual detailing safety instructions and a connection diagram.
Características do produto
- Visor LCD multifuncional: Provides real-time display of charging current, discharge current, and power generation.
- Tecnologia MPPT: Innovative Maximum Power Point Tracking with high efficiency (up to 99%) for optimal solar energy harvesting.
- Proteção confiável: Inclui sobrevol.tage, short circuit, overload, overcharge, and over-discharge protection.
- Automatic Focusing MPPT Tracking: Ensures high charging efficiency and bidirectional focusing tracking.
- Compensação de temperatura: Ajusta automaticamente o volume de carregamentotage based on ambient temperature changes.
- Saídas USB duplas: Provides 5V/2A output for charging mobile devices.
Imagem: Frente view of the CDIYTOOL 100A MPPT Solar Charge Controller, highlighting the LCD display and dual USB ports.
Configuração e instalação
Siga estes passos para instalar corretamente o controlador de carga solar:
- Preparar a fiação: Ensure all wires are correctly sized for the expected current and are properly insulated.
- Conecte a bateria: Connect the battery to the charge controller first. Ensure correct polarity (+ to + and - to -). The controller requires sufficient battery voltage to recognize the system type.
- Conecte o painel solar: Connect the solar panel(s) to the charge controller. Ensure correct polarity. Do not exceed the maximum input voltage de 50V.
- Conectar carga (opcional): Connect your DC load to the load terminals of the controller. The controller can manage load output based on settings.
Image: Connection diagram illustrating how to connect solar panels, battery, and load to the charge controller.
Imagem: Detalhada view of the controller with labels for its components, including buttons, LCD, USB ports, and connection points.
Instruções de operação
The controller features an LCD display and three buttons for operation: Menu, Page Up, and Page Down/Manual.
Tela LCD
O visor LCD exibe vários parâmetros, incluindo a voltagem da bateria.tage, charging current, discharge current, and system status. The icons on the display indicate solar panel activity, battery charge level, and load status.
Funções dos botões
- Botão de menu: Press to enter the menu interface and cycle through different settings. Long press to modify parameters.
- Botão Subir Página: Utilizado para aumentar valores ou navegar para cima nos menus.
- Page Down/Manual Button: Used to decrease values or navigate downwards in menus. Also functions as a manual load control switch (on/off) when on the main interface.
Carregamento USB
The controller is equipped with dual USB ports providing 5V/2A output for charging compatible devices such as mobile phones and tablets.
Image: Demonstration of the controller's dual USB ports being used to charge a mobile phone.
Manutenção
A manutenção regular garante a longevidade e o desempenho ideal do seu controlador de carga solar.
- Inspecionar conexões: Verifique periodicamente se todas as conexões da fiação estão bem apertadas e se há corrosão. Conexões soltas podem causar perda de energia ou superaquecimento.
- Controlador limpo: Mantenha o controlador limpo e livre de poeira e detritos. Use um pano seco para limpar a superfície. Não use produtos de limpeza líquidos.
- Desempenho do monitor: Regularly check the LCD display for normal operation and expected voltage/leituras atuais.
- Saúde da bateria: Ensure your battery is well-maintained and within its recommended operating parameters.
Solução de problemas
Esta seção fornece soluções para problemas comuns que você pode encontrar.
| Situação | Causa provável | Solução |
|---|---|---|
| Sem exibição na tela | Bateria desconectada ou com baixa voltagemtage | Connect battery, check battery voltage |
| No charge when sunny | Solar panel reversed or open circuit | Reconnect solar panel, check wiring |
| Carregar não está funcionando | Load short circuit, overload, or over-discharge protection | Check load wiring, reduce load, or charge battery |
| Controlador não está carregando | vol do painel solartage too low or battery full | Ensure sufficient solar input, check battery status |
The controller includes built-in protections for reverse polarity, overvoltage, short circuit, overload, overcharge, and over-discharge. If an issue persists after troubleshooting, contact customer support.
Especificações
| Parâmetro | Valor |
|---|---|
| Modelo | 4yhujuyj |
| Marca | CDIYTOOL |
| Corrente nominal | 100A |
| Vol do Sistematage | 36V/48V/60V Auto Adapt (Not for 12V/24V) |
| Vol. Máx. De Entrada Solartage | 50V |
| Saída USB | Duplo 5V/2A |
| Tipo de exibição | LCD |
| Peso do item | 14.4 onças |
| Dimensões da embalagem | 6.81 x 3.98 x 2.01 polegadas |
Image: Diagram showing the physical dimensions of the solar charge controller.
Recursos e suporte adicionais
For further assistance or to access the mobile application for monitoring, please refer to the following:
Aplicativo Móvel
The BL-912V APP can be installed on your Android phone to monitor and control the solar charge controller. Scan the QR code below or visit the provided link to download and install the application.
Link para download: http://fir.sdhzwl.cn/5w4b
The mobile phone app allows for remote monitoring of charging and discharging data, daily power generation, and other functions.
Image: Section of the user manual detailing the BL-912V APP installation process, including a QR code.
Garantia e Atendimento ao Cliente
For warranty information or technical support, please contact CDIYTOOL customer service through the platform where you purchased the product. Keep your purchase receipt for warranty claims.
Aplicações típicas
The CDIYTOOL MPPT Solar Charge Controller is suitable for a variety of off-grid solar power applications, including:
- Residential solar power systems
- Sistemas de energia solar para veículos recreativos e embarcações
- Solar street lighting
- Remote monitoring stations
- Agricultural irrigation systems
Imagem: Examples of typical applications for the solar charge controller in various settings.