INTEX Easy Set Inflatable Swimming Pool Set (15ft x 48in)

1. Produto acabadoview

This manual provides instructions for the safe assembly, operation, and maintenance of your INTEX Easy Set Inflatable Swimming Pool Set. This set includes a 15-foot diameter by 48-inch deep inflatable pool, a 1000 GPH cartridge filter pump, a pool cover, a ground cloth, a removable ladder, and a Hydrotools chlorine dispenser.

Image 1.1: Complete INTEX Easy Set Pool package including the inflatable pool, filter pump, ladder, ground cloth, pool cover, and chlorine dispenser.

2. Informações de segurança

AVISO: O não cumprimento destas instruções pode resultar em ferimentos graves ou morte.

• Supervisão de um adulto necessária: Never leave children unattended in or near the pool.
• Não mergulhe: This is an above-ground pool. Do not dive or jump into the pool.
• Segurança química: Handle pool chemicals, including the chlorine dispenser, according to manufacturer instructions. Keep chemicals out of reach of children.
• Segurança elétrica: Ensure the filter pump is connected to a grounded outlet with a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords.
• Área clara: Keep the area around the pool clear of obstacles and ensure adequate space for safe entry and exit.
• Regulamentos locais: Consult local ordinances for fencing, barriers, lighting, and safety requirements.

3. Conteúdo da embalagem

Verifique se todos os componentes listados abaixo estão presentes em seu pacote:

• Inflatable Pool Liner (15 ft diameter x 48 in height)
• Krystal Clear Cartridge Filter Pump (1000 GPH, Model 28637EG)
• Removable Pool Ladder (300 lb / 136 kg max weight capacity)
• Pano de chão
• Cobertura da piscina
• Hydrotools Chlorine Dispenser
• DVD instrutivo (para orientação visual)

Image 3.1: All included accessories for the Easy Set Pool.

4. Instruções de configuração

The INTEX Easy Set Pool is designed for quick and easy assembly, typically within 15 minutes before filling with water. No tools are required for the basic pool setup.

4.1 Preparação do Local

1. Escolha um local de nível: Select a firm, level surface free of sharp objects, debris, or excessive slopes. Uneven ground can cause the pool to collapse.
2. Limpe a área: Ensure the chosen site is large enough for the pool and provides adequate space around it for safety and access.

4.2 Posicionamento da lona de proteção no solo

Unfold the ground cloth and lay it flat on the prepared site. This provides an additional layer of protection for the pool bottom.

Image 4.1: The ground cloth provides protection for the pool's base.

4.3 Montagem da Piscina

1. Unfold the Pool: Carefully unfold the pool liner onto the ground cloth, ensuring the drain plug is positioned away from any structures or areas where water drainage could cause damage.
2. Encha o anel superior: Locate the air valve on the top inflatable ring. Use an air pump (not included) to inflate the ring until it is firm but not over-inflated.
3. Begin Filling with Water: Start filling the pool with water. As the water level rises, the pool walls will begin to rise and take shape. Smooth out any wrinkles on the bottom of the pool by pushing them towards the outer edge.

Image 4.2: The pool is constructed with puncture-resistant 3-ply material for durability.

4.4 Conexão da Bomba de Filtro

Once the pool is partially filled and stable, connect the 1000 GPH cartridge filter pump according to the pump's specific instructions. Ensure all hoses are securely fastened to prevent leaks.

Image 4.3: The Krystal Clear Cartridge Filter Pump ensures clean water.

4.5 Montagem da Escada

Assemble the removable ladder following the included instructions. Place the ladder on a solid, level surface outside the pool. Ensure it is stable before use.

Image 4.4: The removable ladder features hi-impact slip-resistant steps.

5. Instruções de operação

5.1 Operação da Bomba de Filtro

The 1000 GPH filter pump is essential for maintaining water clarity. Operate the pump daily for 2-12 hours, depending on pool usage and water conditions. Refer to the pump's specific manual for detailed operating instructions and timer settings.

5.2 Chlorine Dispenser Use

The Hydrotools chlorine dispenser is used to introduce chlorine tablets into the pool water for sanitation. Fill the dispenser with appropriate chlorine tablets (not included) and adjust the vents to control the release rate. Place the dispenser in the pool away from the filter intake.

Image 5.1: The Hydrotools Chlorine Dispenser for water sanitation.

6. Manutenção

6.1 Química da Água

Regularly test your pool water for pH and chlorine levels using a pool test kit (not included). Maintain pH between 7.2-7.6 and chlorine levels as recommended by your chemical supplier. Adjust chemicals as needed.

6.2 Limpeza e Substituição do Cartucho do Filtro

The filter cartridge inside the pump should be rinsed with a garden hose every few days, or more frequently with heavy use. Replace the cartridge every two weeks or when it remains dirty after cleaning.

6.3 Limpeza de Piscinas

Remove debris from the pool surface using a skimmer net. Vacuum the pool bottom as needed to remove settled dirt and debris.

6.4 Pool Cover Use

Use a capa protetora incluída quando a piscina não estiver em uso para evitar a entrada de detritos e reduzir a evaporação da água.

Image 6.1: The durable pool cover helps keep your pool clean.

6.5 Draining and Storage

To drain the pool, attach a garden hose to the drain plug. Direct the water away from the pool area. Once empty, clean and dry the pool thoroughly before folding and storing it in a cool, dry place away from direct sunlight.

7. Solução De Problemas

• Pool Losing Air: Check the inflatable top ring for punctures. Use a patch kit (not included) for small holes. Ensure the air valve cap is securely closed.
• Water Leaking from Pool: Inspect the pool liner for punctures. The 3-ply material is puncture-resistant but not puncture-proof. Use a patch kit for repairs. Check all hose connections for the filter pump.
• Água turva: This often indicates insufficient filtration or improper water chemistry. Ensure the filter pump is running for adequate hours, clean or replace the filter cartridge, and test/adjust water chemicals.
• Filter Pump Not Working: Check the power connection and GFCI. Ensure the pump is primed and not air-locked. Refer to the pump's specific manual for further troubleshooting.

8. Especificações

9. Garantia e Suporte

For warranty information, missing parts, or technical assistance, please refer to the contact information provided in your product packaging or visit the official Intex website. Guarde o comprovante de compra para solicitações de garantia.