JBL Cinema SB250 Soundbar System

Produto acimaview

The JBL Cinema SB250 is a 2.1 channel wireless Bluetooth soundbar system designed to deliver cinematic virtual surround sound. It features a sleek soundbar and a compact, powerful wireless subwoofer, providing an immersive audio experience for your home entertainment.

Key features include Dolby Digital and Harman Surround for rich audio, JBL SoundShift for seamless switching between TV and mobile device audio, and Harman Volume to maintain consistent sound levels. The system is designed to work with your existing TV remote for simplified control.

Figure 1: The JBL Cinema SB250 Soundbar and its accompanying Wireless Subwoofer.

Componentes incluídos:

• 1 JBL Cinema SB250 Soundbar
• 1 JBL Wireless Subwoofer
• 1 Controle Remoto
• 1 3.5mm Analog Cable
• 1 cabos ópticos
• 1 Guia de início rápido
• 1 Cartão de garantia
• 1 Folha de Segurança

Figure 2: All cables and accessories included with the JBL Cinema SB250 system.

Guia de configuração

1. Localização

Place the soundbar directly in front of your TV, centered. Ensure there are no obstructions in front of the soundbar's speakers. The wireless subwoofer can be placed anywhere in the room, ideally near a wall for optimal bass response. Avoid placing it directly against a wall or in a corner if the bass becomes too boomy.

2. Conexões

Conecte a barra de som à sua TV usando um dos seguintes métodos:

• Optical Digital Input (Recommended): Connect the supplied optical cable from the soundbar's OPTICAL IN port to your TV's optical digital output port. This provides the best audio quality.
• Entrada de áudio analógico: Connect the supplied 3.5mm analog cable from the soundbar's AUX IN port to your TV's audio output (headphone jack or RCA stereo output using an adapter, not supplied).

Certifique-se de que todos os cabos estejam conectados com segurança.

Figura 3: Traseira view of the soundbar and subwoofer, highlighting connection ports.

3. Conexão de energia

Connect the power cords to the soundbar and the wireless subwoofer, then plug them into active power outlets. The soundbar and subwoofer will automatically power on.

4. Emparelhamento de subwoofer sem fio

The soundbar and wireless subwoofer are pre-paired at the factory. If the subwoofer does not automatically connect (indicated by a solid blue LED on the subwoofer), you may need to manually pair them:

1. Press the 'Pairing' button on the rear of the subwoofer. The LED will flash blue.
2. With the soundbar powered on, press and hold the 'Bluetooth' button on the soundbar for 5 seconds. The soundbar's Bluetooth LED will flash.
3. Once connected, the LEDs on both the soundbar and subwoofer will turn solid blue.

Figure 4: Rear panel of the wireless subwoofer, showing the pairing button.

Operação

Soundbar Controls:

Figure 5: Top panel controls of the JBL Cinema SB250 Soundbar.

• Botão de energia: Pressione para ligar ou desligar a barra de som.
• Botão de fonte: Press to cycle through input sources (Optical, Analog, Bluetooth).
• Botões de volume +/-: Ajuste o nível de volume principal.
• Botão Bluetooth: Pressione para entrar no modo de emparelhamento Bluetooth.

Controle remoto:

The included remote control provides full functionality for the soundbar. Additionally, the JBL Cinema SB250 can learn volume control commands from your existing TV remote, simplifying your home cinema experience. Refer to the Quick Start Guide for instructions on programming your TV remote.

Transmissão Bluetooth:

To stream audio from a Bluetooth-enabled device:

1. Press the Bluetooth button on the soundbar or remote. The Bluetooth LED will flash.
2. No seu dispositivo, ative o Bluetooth e selecione "JBL Cinema SB250" na lista de dispositivos disponíveis.
3. Once connected, the Bluetooth LED on the soundbar will turn solid blue.

JBL SoundShift:

JBL SoundShift allows you to seamlessly switch between audio from your TV and audio from a connected Bluetooth mobile device. When a Bluetooth audio signal is detected, the soundbar will automatically switch to the Bluetooth source. When the Bluetooth audio stops, it will revert to the TV audio.

Volume Harman:

Harman Volume technology helps to maintain consistent sound levels, preventing sudden loud commercials or volume spikes when switching content. This feature is enabled by default.

Wall/Table EQ Switch:

The soundbar features a switch on its rear panel to optimize audio performance based on its placement (wall-mounted or tabletop). Adjust this switch according to your installation type for the best sound quality.

Manutenção e Cuidados

• Limpeza: Use um pano macio e seco para limpar as superfícies da barra de som e do subwoofer. Não use produtos de limpeza líquidos ou aerossóis, pois podem danificar o acabamento ou os componentes internos.
• Ventilação: Assegure-se de que haja ventilação adequada ao redor da barra de som e do subwoofer. Não obstrua nenhuma abertura de ventilação.
• Armazenar: Se for armazenar a unidade por um período prolongado, desconecte-a da energia e guarde-a em local fresco e seco, longe da luz solar direta e de temperaturas extremas.

Solução de problemas

Especificações técnicas

Garantia e Suporte

The JBL Cinema SB250 comes with a Garantia do fabricante de 1 anos a partir da data da compra. Guarde o comprovante de compra para eventuais solicitações de garantia.

For free demo/installation assistance and customer support, please contact:

Apoio ao Cliente: 18001020525

Manufacturer: Harman International Industries, Inc