Lutron Maestro Motion Sensor Light Switch

1. Introdução

The Lutron Maestro Motion Sensor Light Switch, model MS-OPS2-LA, provides automatic lighting control for various spaces such as bathrooms, garages, laundry rooms, and closets. This device enhances convenience and promotes energy savings by automatically turning lights on when motion is detected and off after a period of inactivity. It is compatible with all bulb types, including CFL and LED, and is designed for single-pole applications without requiring a neutral wire.

The sensor incorporates Advanced XCT sensing technology to detect fine motions, preventing lights from turning off inadvertently when a room is occupied. It also features patented ambient light detection, ensuring lights only activate when natural daylight is insufficient.

Figure 1: Lutron Maestro Motion Sensor Light Switch (MS-OPS2-LA) in Light Almond.

2. Informações de segurança

AVISO: Risco de choque elétrico. Improper installation can result in serious injury or death. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Consult a qualified electrician if you are unsure about any part of the installation process.

• Instale de acordo com todos os códigos elétricos nacionais e locais.
• Não utilize com cargas que excedam as especificações.
• Este produto é somente para uso interno.
• Certifique-se de que todas as conexões dos fios estejam seguras.

3. Conteúdo da embalagem

The package for the Lutron Maestro Motion Sensor Light Switch (MS-OPS2-LA) typically includes:

• One (1) Lutron Maestro Motion Sensor Switch (MS-OPS2-LA)
• Wiring hardware (e.g., wire connectors)
• Folha de instruções

Note: A coordinating wallplate is sold separately and is not included with the sensor switch.

4. Configuração e instalação

Installation of the Maestro Motion Sensor Switch is designed to be straightforward, typically taking around 15 minutes. This switch is for single-pole applications only and does not require a neutral wire, utilizing the ground wire for installation if no neutral is available.

4.1. Ferramentas necessárias

• Chave de fenda de ponta chata
• Chave de fenda Phillips
• Descascadores/cortadores de fios
• Volumetage testador

4.2. Etapas de instalação

1. Desligar a energia: Locate the circuit breaker or fuse that controls the light switch you are replacing. Turn off the power completely to avoid electrical shock. Verify power is off using a voltage testador.
2. Remover switch existente: Unscrew and carefully remove the existing wallplate and light switch from the wall box. Disconnect the wires from the old switch.
3. Identificar os fios: In a single-pole application, you will typically find two wires connected to the switch (load and line) and a bare copper or green ground wire. This Maestro switch does not require a neutral wire.
4. Wire the Maestro Switch:
   • Conecte o fio terra verde from the wall box to the green wire on the Maestro switch.
   • Conecte o line wire (incoming power) from the wall box to one of the black wires on the Maestro switch.
   • Conecte o fio de carga (to the light fixture) from the wall box to the other black wire on the Maestro switch.
   • Proteja todas as conexões com conectores de fio.
5. Monte o Interruptor: Carefully fold the wires into the wall box, ensuring they are not pinched. Mount the Maestro switch into the wall box using the provided screws.
6. Instalar placa de parede: Attach the coordinating wallplate (sold separately) over the switch.
7. Restaurar energia: Ligue novamente a energia no disjuntor.

5. Instruções de operação

The Lutron Maestro Motion Sensor Light Switch offers both automatic and manual control options.

5.1. Automatic Operation (Occupancy Mode)

In Occupancy Mode (default setting), the lights will automatically turn ON when you enter the room and automatically turn OFF after a set time delay once the room is vacant. The sensor's advanced technology detects motion up to 30 feet away, covering up to 900 square feet.

5.2. Controle Manual

You can manually turn the lights ON or OFF at any time by pressing the main button on the switch. If the lights are manually turned OFF, they will remain off until motion is detected again or until manually turned ON.

5.3. Smart Light Detection

The switch senses ambient daylight in the room. If sufficient natural light is present, the lights will remain off even if motion is detected, further conserving energy. The sensor learns your preferred light levels over time to optimize this function.

6. Modos de Programação

The Maestro sensor switch can be configured for different operational modes and time delays to suit your needs.

6.1. Occupancy Mode (Auto ON, Auto OFF)

This is the default setting. Lights turn on automatically when motion is detected and turn off automatically after the set time delay when the room is vacant.

6.2. Vacancy Mode (Manual ON, Auto OFF)

In Vacancy Mode, you manually turn the lights ON when entering the room. The sensor will then automatically turn the lights OFF after the set time delay when the room becomes vacant. This mode is often preferred for bedrooms or rooms with pets to prevent unintended light activation.

6.3. Time Delay Settings

The time delay before lights turn off after no motion is detected can be programmed. Common settings include 1, 5, 15, or 30 minutes. Refer to the detailed programming instructions included with your product for specific steps on adjusting these settings.

Typically, programming involves a sequence of button presses and holds on the switch. For example, to change the time delay, you might press and hold the main button until an indicator light blinks, then press it a certain number of times to select the desired delay.

7. Solução De Problemas

If you encounter issues with your Maestro Motion Sensor Light Switch, consider the following common solutions:

• Lights do not turn ON automatically:
  • Ensure power is restored at the circuit breaker.
  • Check wiring connections for security.
  • Verify the switch is in Occupancy Mode (Auto ON).
  • Confirm the sensor lens is not obstructed.
  • Check if there is too much ambient daylight, preventing activation.
• As luzes não apagam automaticamente:
  • Ensure the time delay setting is appropriate (e.g., not set to 30 minutes if you expect a shorter delay).
  • Check for continuous motion within the sensor's range, including subtle movements or drafts that might trigger it.
  • Verify the switch is not stuck in a manual ON state.
• Sensor sensitivity issues:
  • Adjust the sensor's sensitivity settings if available (refer to product-specific programming instructions).
  • Ensure the sensor is not positioned where it can detect motion outside the intended area (e.g., through a doorway).

For further assistance, refer to the detailed troubleshooting guide provided with your product or contact Lutron customer support.

8. Especificações

9. Garantia e Suporte

Lutron products are known for their quality and reliability. For specific warranty information regarding your Maestro Motion Sensor Light Switch, please refer to the warranty card included with your product or visit the official Lutron website.

Lutron offers customer support to assist with installation, programming, and troubleshooting. You can typically find contact information for support on the Lutron website ou dentro da embalagem do produto.

Para obter recursos adicionais e informações sobre o produto, visite o Loja Lutron na Amazon.