د Metra DP-7528 واحد یا ډبل DIN ډیش پینل لارښوونې لارښود
Metra DP-7528 واحد یا ډبل DIN ډیش پینل

د کټ ب .ې

  • د جیب سره د ISO DIN راډیو چمتو کول
  • ISO ODIN radio provision
  • Textured to match the factory dash.
  • Can also be used as a factory dash replacement with factory Mazda radios.

د کټ توکي

د کټ توکي

  • الف) د راډیو هستوګنه
  • B) Radio trim panel
  • C) د راډیو بریکٹونه
  • D) پاکټ
  • E) #8 x 3/8″ فیلیپس پیچ (10)
  • F) د پینل کلیپونه (2)
  • G) #8 x 1/2″ Phillips screws (2)

د تارونو او انټینا تړاوونه (په جلا توګه پلورل شوي)

د تار تار: 70-7901
Visit metraonline.com for audio/video and steering
wheel control interface options.
د انتن اډاپټر: اړتیا نشته

اوزارونه اړین دي

  • د پینل لرې کولو وسیله
  • فلپس سکریوډرایور

پاملرنه! With the key out of the ignition, disconnect the negative battery terminal before Installing this product. Ensure that all Installation connections are secure before cycling the ignition to test this product.

د ډش ناڅاپي ناروغۍ

From the center console: 

  1. Unclip ashtray to reveal (1) Phillips screw and remove. (Figure A)
  2. Open storage compartment and remove (2) Phillips screws. (Figure B)
  3. Locate the (2) Phillips screws on the front sides of the gear shifter trim panel and remove. (Figure C )
    د ډش ناڅاپي ناروغۍ
  4. Unscrew gear shift knob. (Figure D)
  5. Unplug (2) connectors and remove the center console. (Figure E)
    د ډش ناڅاپي ناروغۍ

د فابریکې راډیو مجلس څخه: 

  1. Unclip and remove center air vents to reveal (2) screws at the top of the radio trim panel. Remove the (2) screws. (Figure F)
  2. Unplug and remove the radio trim panel. (Figure G)
  3. Remove the (4) Phillips screws and pull out the radio assembly. (Figure H)
    د ډش ناڅاپي ناروغۍ
  4. Remove (2) Phillips screws from the support bar on top of radio trim. Save bar for kit preparation. (Figure I)
  5. Remove (2) Phillips screws to remove the hazard switch. Save switch for kit preparation. (Figure J)
  6. Remove (1) screw from each air vent retaining clip. Keep together for (Figure I) kit preparation. (Figure K)
    د ډش ناڅاپي ناروغۍ

د KIT چمتووالی

  1. Secure the support bar to the top of the radio housing using the (2) screws removed in step 4. (Figure A)
  2. Secure the hazard switch using the (2) #8 x 1/2″ Phillips screws provided. (Figure B)
  3. Transfer the retaining clips to the corresponding locations on the radio housing using screws removed in step 6. (Figure C)
    د KIT چمتووالی
  4. Attach the radio trlmplate to the radio housing using (6) of the supplied #8 x 3/8″ Philips screws. (Figure D)
  5. Attach the (2) panel clips to the radio housing. (Figure E)
    د KIT چمتووالی

کیټ ASSEMBLY

د جیب سره د ISO DIN راډیو چمتو کول 

  1. Attach the pocket to the radio brackets using (4) of the supplied #8 x 3/8″ Phillips screws. (Figure A)
  2. Slide the radio into the bracket/pocket (iii. assembly and secure it using the screws supplied with the radio. (Figure B)
  3. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra -~ and/or AXXESS.
  4. Slide the radio into the sub dash and secure it using the factory hardware.
  5. Reassemble the dash in reverse order of  (Figure 8) disassembly using the new 7528 radio housing.
    کیټ ASSEMBLY

ISO ODIN radio provision 

  1. Attach the radio brackets to the radio using the screws supplied with the  radio. (Figure A)
  2. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS.
  3. Slide the radio into the sub dash and secure it using the factory hardware.
  4. Reassemble the dash in reverse order of disassembly using the new 7528 radio housing.
    کیټ ASSEMBLY

مشکلات لری؟ موږ دلته د مرستې لپاره یو.

QR Code

انځورنونو  زموږ د ټیک سپورټ لاین سره اړیکه ونیسئ:
386-257-1187
انځورنونو یا د بریښنالیک له لارې:
[ایمیل خوندي شوی]

د ټیک ملاتړ ساعتونه (ختیځ معیاري وخت) 

دوشنبه-جمعه: د سهار 9:00 بجو څخه تر 7:00 بجو پورې
Saturday: 10:00 AM- 7:00 PM
یکشنبه: د سهار له 10:00 بجو څخه تر 4:00 بجو پورې

مجلو پوهیدل ځواک دی
Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school In our industry. Log onto www.installerinstituto.edu or call 386-672-5771 for more information and take stops toward a better tomorrow

مجلو میټرا د MO تصدیق شوي تخنیکران وړاندیز کوي

اسناد / سرچینې

Metra DP-7528 واحد یا ډبل DIN ډیش پینل [pdf] لارښود لارښود
DP-7528, Single or Double DIN Dash Panel, DP-7528 Single or Double DIN Dash Panel, Double DIN Dash Panel, DIN Dash Panel, Dash Panel, Panel

ماخذونه

خپل نظر ورکړۍ

ستاسو برېښليک پته به خپره نشي. د اړتیا په پټيو کې په نښه *