Rexing DT2 User Manual
The information in this manual is subject to change without notice. Rexing All Rights Reserved.
Website: www.rexingusa.com
Activate Your 18-Month Warranty & Choose Your FREE Gift!
Activate within 30 days of purchase to claim your free gift and extend your limited 12-month warranty to 18 months.
Scan the QR code to activate and select your free gift.
Overview
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.
✉️ Email: care@rexingusa.com
? Phone: (877) 740-8004
Our support team will respond to you as soon as possible. Always a surprise with Rexing.
Check us out here:
- f Facebook: https://www.facebook.com/rexingusa/
- ? Instagram: https://www.instagram.com/rexingdashcam/
- ? Site: https://www.rexingusa.com/support/registration/
Package Contents
Diagram shows all package contents: the Rexing DT2 Dash Cam, rear camera with cable, Type-C data cable, 3M adhesive, cable clips, car charger, cable management tool, user manual, 32GB SD card, warning sticker, and electrostatic sticker.
- Rexing DT2 Dash Cam
- Rear camera with rear camera cable
- Type-C Data Cable (for transferring files only)
- 3M Adhesive
- Cable Clips
- Car Charger
- Cable Management Tool
- Users Manual
- 32GB SD Card
- Warning Sticker
- Electrostatic Sticker
Camera Overview
Diagram illustrates the Rexing DT2 dash cam. The front view shows the lens and speaker grille. The side views highlight the 3" LCD screen, the buttons (OK/RECORD/POWER, DOWN/MUTE, UP/TOGGLE VIEW, MENU/MODE/LOCK), and ports (Reset Button, Rear Camera Port, USB-C Charging Port, Micro SD Card Slot).
Dash Cam Screen Interface
Diagram displays the dash cam's screen interface, showing icons and information for: Recording Mode, Recording status (On/Off), WDR Mode (On), G-Sensor Sensitivity Level, Recording Time (Current Clip), Video Resolution, Parking Mode (On), Memory Card (Inserted), Battery Charging, Plate Number, Time, Current Date Time, MIC (ON), Exposure Value, and Loop Recording Time Interval.
Get Started
Step 1: Installing Adhesive Mount
Place the 3M adhesive on the mount plate and properly orient the mount piece to the roof and hood line of the vehicle.
Step 2: Installing the Electrostatic Stickers
2.1 Prepare Your Windshield
Thoroughly cleanse your windshield with either water or alcohol. Follow this by wiping it dry using a clean, dry cloth to ensure a spotless surface.
2.2 Position the Sticker
Next, carefully peel off the protective film from the electrostatic sticker. Attach the sticker to the windshield, ideally behind the rear-view mirror. This position is recommended to avoid obstructing your view while you're on the road.
2.3 Secure the Mount and Camera
Now, remove the 3M tape from the mount. Once done, you can proceed to fix both the mount and camera onto the previously positioned electrostatic stickers.
Note: Be sure to handle each component with care and follow the guidelines in their respective order. This is to ensure optimal performance of the sticker, the mount, and the camera.
Step 3: Mount the Rear Camera
Mount the rear camera as shown below. Use the included rear camera cable to connect the rear camera to the front camera.
Diagram shows the rear camera being connected to the front dash cam via its cable. A second diagram illustrates the typical routing of the rear camera wiring within a vehicle's interior, connecting from the front to the rear of the car.
Step 4: Insert the Memory Card
The Rexing DT2 accepts Class 10/ UHS-1 or higher Micro SD memory cards up to 128GB. You will need to insert a memory card before recording.
Before inserting or removing a memory card, ensure you've powered down the device.
Gently push the memory card in until you hear a click, and allow the spring release to push the card out.
Diagram shows the Micro SD card slot on the dash cam and the insertion of the memory card. A separate diagram indicates the OK button, with text suggesting to hold it for approximately 3 seconds to turn the device off before inserting or removing the card.
Step 5: Power on the Camera and Format the Memory Card
Power the camera by connecting the charger to the car cigarette lighter and the camera.
Diagram illustrates the power connection for the dash cam. The Type-C connector plugs into the dash cam, the power cable is routed through the vehicle, and the car charger plugs into the vehicle's power outlet or cigarette lighter.
The camera will shut down after 3 seconds when it's disconnected from the power source and should begin recording automatically the next time it is powered on.
To ensure the DT2 records to your memory card properly and without error, we strongly recommend you to format the card within the camera when you're using the dash cam for the first time.
Note: Always remember to back up important data stored on the memory card before formatting.
Formatting the Memory Card
To format the memory card, first press the OK button to stop recording. Then press the MENU button twice to enter the Setup Settings. Use the ⬆️ and ⬇️ buttons to toggle to the Format option. Press the OK button to confirm the format.
Diagrams show the dash cam's menu interface for formatting the memory card. The first shows navigation to 'Format' within 'Setup Settings' using MENU and arrow buttons. The second confirms the formatting action.
Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and receives a charge (i.e., the vehicle is started).
To turn the device on manually, press and hold the OK button until the welcome screen appears.
The camera will automatically start recording when power is on.
Diagram shows the side of the dash cam with the OK button highlighted, indicating that pressing and holding it turns the device on manually.
Menu Settings
Power the camera on, then press the OK button to stop recording. Press the MENU button and switch among video mode, image mode, and playback mode.
Press the MENU button once to enter the Video Settings, or press the MENU button twice to enter the Setup Settings menu.
Diagrams illustrate navigating the dash cam's menu. One shows pressing the MENU button to toggle between modes (Video, Setup). Another shows pressing the OK button to enter a selected setting menu.
Video Recording
The camera will automatically start recording when the device receives a charge. The LED lights and the red dot will blink when the device is recording. Press the OK button to stop recording.
Diagram shows the dash cam's screen interface with indicators that blink when the dash cam is recording.
Video Playback
To playback a video on the device, press the OK button to stop recording. Press and hold the MENU button twice to enter the Playback mode. Use the ⬆️ and ⬇️ buttons to toggle to the desired video. Press the OK button to play.
During playback, use the OK button (pause), ⬇️ (fast forward), and ⬆️ (rewind) buttons to control the video playback.
Diagrams show the dash cam's playback interface. One shows the playback mode with a video file name. Another highlights the control buttons for playback: OK for pause, and arrow buttons for fast forward/rewind.
Playback via SD Card Reader
To playback a video by using an SD card reader, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer.
Parking Monitor (Parking Surveillance Mode)
Parking monitor provides surveillance on your parked vehicle. When the engine is off, the hardwire kit is used to provide continuous power and protect your car battery from being discharged.
Option 1: Vibration Detection
To enable the Parking Monitor, you'll need to connect it with a Smart Hardwire Kit (sold separately).
Diagram shows the wiring connections for a parking monitor setup, illustrating connections for Battery, ACC (Accessory), and Ground.
This feature will allow the dash cam to switch to parking mode automatically if the vehicle's engine turns off and switch back to the normal recording after the vehicle's engine turns on.
Gravity Sensing Record
The Gravity Sensing detects significant or sudden movement (such as an impact or collision), it will trigger an event recording. Rexing suggests setting the "Gravity Sensing" to High sensitivity for Parking Mode Recording.
Note: If you do not use the parking mode function, please change the Gravity Sensing sensitivity to low. Otherwise, the video will easily be locked and the video cannot be deleted by the loop recording function. This will cause the memory card to be full of locked videos and cause the recorder to fail to work normally.
Warning: Please DO NOT ENABLE the Parking Monitor function in the settings of the dash cam WITHOUT connecting a smart hardwire kit. They may cause a malfunction.
Option 2: Motion Detection
To use this feature, you need to connect it with a Rexing Intelligent Hardwire Kit (sold separately). Make sure that the Parking Mode is turned off on your dash cam, otherwise it may cause a malfunction.
Once the sensor has detected MOTIONS, the intelligent hardwire kit will power up the dash cam automatically and start recording until the MOTION is cleared.
Please go to https://www.rexingusa.com/hwk-install/ to watch a video tutorial about the installation.
Taking and Reviewing Photos
To take a photo, press the OK button to stop recording. Press the MENU button once to enter photo mode. Then press the OK button to take a photo.
To view/delete a photo, stop video recording and enter the Playback Mode. Toggle through the videos and photos to the one you want to view/delete. Press the MENU button once and toggle to the Delete option. Press the OK Button and select Delete Current or Delete All.
Diagrams illustrate the photo mode and deletion process. The first shows the camera interface in photo mode. The second shows the playback mode with a photo selected. The third shows the delete menu options (Delete, Protect, Slideshow). The fourth shows the confirmation prompt for deleting photos (Current or All).
Warranty & Support
Warranty
The Rexing DT2 comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months.
Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
Your Opinion Matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions.
Connect with us today at care@rexingusa.com.
Thank you for choosing Rexing!
Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
Brand: REXING
Certifications: FC, ROHS, CE
Manufactured: MADE IN CHINA
