FCOB SP530E

FCOB SP530E WiFi Bluetooth LED Controller and COB LED Strip Light User Manual

ماډل: SP530E

1. پیژندنه

This manual provides detailed instructions for the installation, operation, and maintenance of your FCOB SP530E WiFi Bluetooth LED Controller and accompanying 6000K Daylight White COB LED Strip Light. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. د خوندیتوب معلومات

  • د بریښنا رسولو حجم ډاډمن کړئtage matches the product specifications (24V). Incorrect voltage کولی شي وسیله زیانمن کړي.
  • Do not expose the controller or LED strip to moisture or extreme temperatures.
  • د هر ډول اړیکو جوړولو یا ساتنې ترسره کولو دمخه بریښنا قطع کړئ.
  • Avoid bending the LED strip sharply to prevent damage to the internal circuitry.
  • د ماشومانو د لاسرسي څخه لرې وساتئ.

3. د بسته محتويات

ډاډ ترلاسه کړئ چې ټول توکي ستاسو په کڅوړه کې شتون لري:

  • SP530E WiFi Bluetooth LED Controller
  • 6000K Daylight White COB LED Strip Light (32.8FT)
  • د DC بریښنا نښلونکي
  • د کلپونو او پیچونو نصب کول
  • کوچنی سکرو ډرایور
FCOB SP530E Controller and COB LED Strip Light Kit

Image 3.1: Contents of the FCOB SP530E LED Controller and Strip Light kit, including the controller, COB LED strip, power connectors, mounting clips, and a screwdriver.

4. مشخصات

  • د کنټرول ماډل: SP530E
  • ارتباط: WiFi, Bluetooth LE5.0
  • ننوتۍ جلدtage: ډي 5-24V
  • د محصول چینلونه: 6-channel (PWM), SPI
  • اعظمي محصول اوسنی: 10A
  • د کار د حرارت درجه: له 20 درجو څخه تر 60 درجو پورې
  • د LED پټې ډول: د COB LED پټې رڼا
  • د LED پټې اوږدوالی: 32.8FT (10 meters)
  • د LED کثافت: 320 LEDs/میټر
  • د رنګ حرارت: 6000K د ورځې رڼا سپینه
  • د بیم زاویه: 180°
  • د پرې کولو وړ: Every 1.97 inches (5cm) at marked lines
  • د DC پلګ اندازه: 5.5mm x 2.1mm

5. ترتیب او نصب کول

5.1 LED Strip Preparation

  1. اندازه کول او پرې کول: If a shorter length is required, cut the COB LED strip only at the designated cutting marks (usually indicated by a scissor icon or copper pads).
LED Strip Cutting Instructions

Image 5.1: Illustration showing correct and incorrect cutting points for the LED strip. Always cut along the marked lines to ensure functionality.

  1. پاکه سطحه: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
  2. پوستکی او پوستکی: Remove the backing from the adhesive tape on the back of the LED strip and firmly press the strip onto the desired surface.
  3. د کلپونو سره خوندي کړئ: For added security, use the provided mounting clips and screws, especially for longer runs or uneven surfaces.

۴.۲ د کنټرولر تارونه

The SP530E controller supports both PWM (non-addressable) and SPI (addressable) LED strips, including combined setups. Refer to the labels on the controller for correct wiring.

  • PWM LED Strips (e.g., Monochrome, CCT, RGB, RGBW, RGBCCT): Connect the corresponding wires from your LED strip to the V+, R, G, B, CW, WW terminals on the controller. Ensure polarity is correct.
  • SPI LED Strips (e.g., WS2811, WS2812B): Connect the Data (DAT) wire from your SPI strip to the DAT terminal on the controller. Connect the Ground (GND) wire to the GND terminal.
  • د بریښنا پیوستون: Connect the DC power adapter (not included) to the DC Power Jack Socket (5.5mm x 2.1mm) on the controller. Ensure the power supply is rated for 24V and has sufficient current capacity for your LED strips.
SP530E Controller Compatibility and App Interface

Image 5.2: The SP530E controller is compatible with various PWM and SPI LED strip types, including single color, CCT, RGB, RGBW, and RGBCCT configurations. The image also shows the associated mobile application interface.

6. عملیات

6.1 د کنټرول میتودونه

The SP530E controller offers multiple ways to manage your LED lighting:

  • د APP کنټرول: Connect via 2.4GHz WiFi or Bluetooth LE5.0 using the dedicated mobile application (Banlanx APP). This allows for comprehensive control over colors, effects, brightness, and scheduling.
  • 2.4G RF Remote / Smart Panel Control: Compatible with separately purchased 2.4G RF touch remotes or wall-mounted smart panels for convenient local control.
  • د دریمې ډلې غږ کنټرول: Integrate with smart home systems like Amazon Alexa or Google Home for voice-activated control (requires initial setup through the mobile app).
Three Control Methods for SP530E LED Controller

Image 6.1: Visual representation of the three primary control methods: mobile application, 2.4G RF remote/smart panel (sold separately), and third-party voice assistants like Amazon Alexa and Google Home.

6.2 Mobile Application (Banlanx APP)

Download the Banlanx APP from your device's app store. Follow the in-app instructions to pair your SP530E controller via WiFi or Bluetooth.

  • متحرک حالتونه: Choose from various pre-programmed dynamic lighting effects.
  • کلک رنګونه: Select any static color from a color wheel or adjust white light temperature.
  • د موسیقۍ اغیزې: Synchronize lighting with music using player streaming, mobile microphone, or the controller's built-in microphone.
  • د DIY اغیزې: Create and customize your own lighting patterns and sequences.
  • ټایمر: Set schedules for turning lights on/off or activating specific modes.
  • د روښانتیا سمون: Adjust the overall brightness level from 0% to 100%.
Banlanx APP Interface for SP530E Controller

Image 6.2: Screenshots of the Banlanx mobile application, showcasing features such as dynamic modes, music synchronization, parameter settings, timers, and pattern customization.

SP530E Music Effects Feature

Image 6.3: The SP530E controller's music effects feature, allowing synchronization of LED strip or matrix lighting with audio input from player streaming, mobile microphone, or the built-in microphone.

۶.۳ د روښانتیا کموالی

The controller allows for precise brightness adjustment of the connected LED strips. This can be controlled via the mobile application, RF remote, or voice commands.

LED Strip Brightness Dimming Example

انځور ۲.۲: یو پخوانیample of an LED strip installed in a living room setting, demonstrating various brightness levels (100%, 80%, 60%, 40%) achievable with the controller.

7. ساتنه

  • پاکول: Gently wipe the LED strip and controller with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
  • معاینه: Periodically check connections for any signs of wear or damage.
  • ذخیره کول: If storing the product for an extended period, ensure it is kept in a dry, cool environment away from direct sunlight.

8. ستونزه حل کول

ستونزهاحتمالي لاملد حل لاره
د LED پټه نه روښانه کیږيNo power; incorrect wiring; faulty strip/controllerCheck power supply connection; verify wiring polarity; test with another strip/controller if available.
Incorrect colors or effectsIncorrect strip type selected in app; wiring issueEnsure correct LED strip type (PWM/SPI, RGB/CCT, etc.) is configured in the Banlanx APP. Recheck wiring.
Controller not connecting to appWiFi/Bluetooth off; incorrect network; controller too farEnsure WiFi/Bluetooth is enabled on your phone. Connect to a 2.4GHz WiFi network. Move closer to the controller. Reset controller if necessary (refer to app for reset procedure).
Strip sections not working after cuttingCut at wrong locationOnly cut at designated marks. Sections cut incorrectly cannot be repaired.

9. تضمین او ملاتړ

For warranty information and technical support, please refer to the FCOB official webسایټ ته لاړ شئ یا خپل پرچون پلورونکي سره اړیکه ونیسئ. د پیرود ثبوت په توګه د پیرود رسید وساتئ.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.