Godox V1Pro S Flash for Sony Camera User Manual

1. پیژندنه

This manual provides detailed instructions for the safe and effective operation of your Godox V1Pro S Flash for Sony cameras. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage to the product.

The Godox V1Pro S is a round head flash designed for Sony cameras, featuring TTL auto flash, 2.4G wireless X system, high-speed sync (HSS), and a detachable external flash unit (SU-1). It is capable of up to 100 continuous full-power flashes and offers a quick 1.3-second recycle time.

2. محصول ختم شوview او کلیدي ځانګړتیاوې

انځور: اوورview of the Godox V1Pro S flash unit, highlighting its main features such as detachable SUB flash SU-1, 100 continuous flashes, Type-C charging, TTL/M switch, HSS, power supply port, 2.4G wireless, and 1.3-second recycle time.

• Detachable External Flash SU-1: Allows for versatile lighting setups, functioning as both bounce flash and fill light.
• High Continuous Shot Capacity: Supports up to 100 consecutive flashes at full power without thermal protection constraints.
• د چټک بیا کارولو وخت: Achieves a 1.3-second recycle time for rapid shooting.
• 2.4G Wireless X System: د نورو ګوډوکس فلشونو سره د بې سیمه ادغام لپاره مدغم بېسیم سیسټم.
• د یو کلیک TTL/M سویچ: Easy switching between TTL auto flash and manual modes.
• عصري چارج کول: Supports Type-C USB charging and the original VC26 charger.
• د تنظیم وړ LED ماډلینګ رڼا: Features a 10-level adjustable LED for pre-visualization.

۲. په بکس کې څه دي؟

Image: Contents of the Godox V1Pro S package, including the flash body, storage bag, detachable sub flash SU-1, lithium battery, USB-C charging cable, camera flash stand, and charger.

The Godox V1Pro S package typically includes the following items:

• Godox V1Pro S Flash Body
• د جلا کولو وړ فرعي فلش SU-1
• Lithium Battery (VB30)
• د USB-C چارج کیبل
• چارجر
• د ذخیره کولو کڅوړه
• Camera Flash Stand
• د کارونکي لارښود (دا لاسوند)

4. ترتیب او نصب کول

۱. د بیټرۍ نصب او چارج کول

The V1Pro S uses a dedicated lithium battery. Ensure the battery is fully charged before first use.

1. د فلش واحد په بیټرۍ پوښ خلاص کړئ.
2. د لیتیم بیټرۍ دننه کړئ، د سم قطبیت ډاډ ترلاسه کړئ.
3. د بیټرۍ کمپارټ پوښ په خوندي ډول وتړئ.
4. To charge, connect the flash via the USB-C port using the provided cable and charger, or use the original VC26 charger for the battery.

Image: The Godox V1Pro S flash being charged via its Type-C port and the separate battery being charged with the VC26 charger.

۵.۳. په کامرې کې د فلش نصبول

1. Slide the V1Pro S flash hot shoe onto your Sony camera's hot shoe mount.
2. Tighten the locking mechanism to secure the flash in place.

4.3. Detachable Plastic Ring for AK-R1 Accessories

The V1Pro S is equipped with a detachable plastic ring. If you intend to use AK-R1 accessories (sold separately), you may need to remove this plastic ring and replace it with a standard universal iron ring or magnetic ring. This allows for compatibility with the AK-R1 magnetic accessory system.

Image: The Godox V1Pro S flash head, illustrating the area where the detachable plastic ring is located for AK-R1 accessory compatibility.

5. عملیاتي لارښوونې

5.1. بریښنا فعال/بند

د فلش واحد د فعال یا بندولو لپاره د بریښنا تڼۍ فشار ورکړئ او ونیسئ.

5.2. TTL and Manual Mode Switching

The V1Pro S features a dedicated button for quick switching between TTL (Through-The-Lens) auto flash mode and Manual (M) mode. Press the ټي ټي ايل/م button to toggle between these exposure control types.

Image: Close-up of the Godox V1Pro S control panel, showing the prominent TTL/M switch button for quick mode changes.

5.3. 2.4G Wireless X System Operation

The V1Pro S supports 2.4G wireless transmission and reception, allowing it to function as both a master and slave unit within the Godox X wireless system. This enables seamless integration with other compatible Godox flashes for multi-light setups.

Image: Diagram illustrating the Godox V1Pro S operating as a wireless transmitter and receiver, controlling other flash units remotely.

Refer to the detailed wireless control section in the full product manual for specific channel and group settings.

5.4. Using the External Flash SU-1

The innovative detachable SU-1 external flash component can be attached to the V1Pro S. This allows the main flash to serve as a bounce flash while the SU-1 provides a direct fill light, enhancing versatility in various shooting scenarios. To attach or detach, align the SU-1 with its designated port on the V1Pro S and secure it.

Image: The Godox V1Pro S flash unit with the detachable SU-1 external flash module shown next to it, illustrating its modular design.

5.5. Continuous Shooting Performance

The V1Pro S is engineered to support up to 100 continuous flashes at full power before engaging thermal protection. This feature is beneficial for high-speed photography and situations requiring rapid, consistent illumination.

Image: A photographer using the Godox V1Pro S flash, with an overlay indicating its capability for up to 100 continuous shots at full power.

5.6. LED Modeling Light

The V1Pro S includes a 10-level adjustable LED modeling light. This light can be used to pre-visualize the lighting effect before taking a shot, aiding in precise light placement and composition.

Image: A model illuminated by the Godox V1Pro S's LED modeling light, demonstrating its use for pre-visualization of lighting.

6. ساتنه

• د فلش واحد وچ وساتئ. په لوندو لاسونو مه کاروئ.
• د فلش سر او بدن د نرم او وچ ټوکر سره پاک کړئ. د محلولونو یا سختو کیمیاوي موادو کارولو څخه ډډه وکړئ.
• فلش په یخ او وچ ځای کې وساتئ، د مستقیم لمر وړانګو او سختې تودوخې څخه لرې.
• Remove the battery if the flash will not be used for an extended period.

7. مشخصات

8. تضمین او ملاتړ

د تضمین معلوماتو او تخنیکي ملاتړ لپاره، مهرباني وکړئ رسمي ګوډوکس ته مراجعه وکړئ webسایټ ته لاړ شئ یا خپل مجاز پلورونکي سره اړیکه ونیسئ. د تضمین ادعاوو لپاره د پیرود ثبوت په توګه د پیرود رسید وساتئ.

You can find more information about Godox products and support at the په ایمیزون کې د ګوډوکس پلورنځی.