1. د خوندیتوب معلومات
Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.
- د ماشومانو د لاسرسي څخه لرې وساتئ.
- Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
- Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
- د عملیاتو په جریان کې انفلیټر بې پامه مه پریږدئ.
- Avoid exposing the inflator to rain or moisture.
- Do not attempt to disassemble or modify the device. Contact customer support for assistance.
- یوازې چمتو شوي چارجینګ کیبل او لوازم وکاروئ.
- انفلیټر په یخ او وچ ځای کې وساتئ کله چې کارول نه وي.
2. د بسته محتويات
ډاډ ترلاسه کړئ چې ټول توکي ستاسو په کڅوړه کې شتون لري:
- 1x SYNCWIRE SW2002 Portable Tire Inflator
- 1x Air Hose
- 1x USB-C چارج کیبل
- د 1x ذخیره کڅوړه
- 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
- 4x Car Tire Valve Caps
- ۱x د کارونکي لارښود (دا سند)
- 1x Warranty Policy

Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.
3. محصول ختم شوview
3.1 کلیدي ځانګړتیاوې
- High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
- لوی LCD نندارې: Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
- Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
- د موټرو بندول: کله چې ټاکل شوي فشار ته ورسیږي، په اتوماتيک ډول انفلاسیون ودروي.
- د انفلاسیون څو طریقې: 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
- څو اړخیز واحدونه: Supports PSI, KPA, BAR, and KG/CM².
- جوړ شوی LED فلش لائټ: په ټیټ رڼا شرایطو کې د کارولو لپاره روښانتیا چمتو کوي.
- د بریښنا بیړني بانک: USB output port allows charging of mobile devices.
- کمپیکٹ او پورټ ایبل: د اسانه ذخیره کولو او ټرانسپورټ لپاره ډیزاین شوی.
3.2 وسیله وسیله

انځور: مخکینۍ برخه view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.
- د LCD نندارې: Shows current and target pressure, battery level, and selected mode.
- د حالت تڼۍ: Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
- د بریښنا تڼۍ: وسیله چالان/بندوي او انفلاسیون پیل/بندوي.
- +/- تڼۍ: Adjusts preset pressure values.
- د واحد تڼۍ: Changes pressure units (PSI, KPA, BAR, KG/CM²).
- د LED ر Lightا تtonۍ: Activates/deactivates the built-in flashlight.
- د هوا نلی بندر: Connects the air hose to the inflator.
- د USB-C داخلول: د انفلاسیون چارج کولو لپاره.
- د USB-A محصول: د انفلاټر د پاور بانک په توګه کارولو لپاره.
4. ترتیب کول
۳.۱ د انفلاسیون چارج کول
- Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
- د کیبل بل پای د یو مناسب USB بریښنا اډاپټر (شامل نه دی) یا USB پورټ سره وصل کړئ.
- The battery indicator on the LCD display will flash during charging and become solid when fully charged.
- A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.
۳.۲ د هوا نلی او نوزل نښلول
- Screw the air hose securely into the air hose port on the top of the inflator.
- Select the appropriate nozzle adapter for the item you wish to inflate.
- Screw the chosen nozzle adapter onto the free end of the air hose.
5. عملیاتي لارښوونې
5.1 بریښنا کول / بندول
- فشار ورکړئ او ونیسئ د بریښنا تڼۍ for 3 seconds to turn the inflator on.
- The LCD display will light up, showing the current battery level and default mode.
- د بندولو لپاره، فشار ورکړئ او ونیسئ د بریښنا تڼۍ for 3 seconds again, or the device will automatically shut off after a period of inactivity.
۵.۲ د انفلاسیون حالت او واحد غوره کول

Image: The inflator's LCD screen displaying various preset inflation modes.
- د بریښنا له فعالولو وروسته، فشار ورکړئ د موډ تڼۍ to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
- Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
- فشار ورکړئ د واحد تڼۍ to switch between pressure units: PSI, KPA, BAR, KG/CM².
۵.۳ د مطلوب فشار تنظیمول
- Once a mode is selected, the preset pressure value will flash on the LCD.
- د کارولو + او - buttons to adjust the desired target pressure.
- Refer to your vehicle's or item's manufacturer recommendations for correct pressure values.
۴.۴ د انفلاسیون پیل او بندول

Image: The inflator actively inflating a car tire, demonstrating its speed.
- Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
- فشار ورکړئ د بریښنا تڼۍ to start inflation. The real-time pressure will be displayed.
- انفلیټر به په اتوماتيک ډول ودریږي کله چې ټاکل شوي فشار ته ورسیږي.
- To manually stop inflation, press the د بریښنا تڼۍ بیا
- Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.
۶.۳ د LED فلش لائټ کارول
- فشار ورکړئ د LED رڼا تڼۍ د فلش لائټ فعالولو لپاره.
- Press again to cycle through different light modes (e.g., steady, SOS, flashing).
- Press a third time to turn off the flashlight.
۴.۴ د پاور بانک فعالیت

Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.
- Connect your device's charging cable to the USB-A output port on the inflator.
- The inflator will begin charging your device. This function is useful for emergencies.
6. ساتنه
6.1 پاکول
- Ensure the inflator is turned off and disconnected from any power source before cleaning.
- بهرنۍ برخه په نرمۍ سره مسح کړئ، دamp ټوکر د سختو کیمیاوي موادو یا خړوبولو پاکونکو څخه کار مه اخلئ.
- Keep the air intake and exhaust vents clear of dust and debris.
6.2 ذخیره کول
- Store the inflator and its accessories in the provided storage bag.
- وسیله په یخ او وچ ځای کې وساتئ، د مستقیم لمر وړانګو او سختې تودوخې څخه لرې.
- For prolonged storage, charge the inflator every 3-6 months to maintain battery health.
7. ستونزه حل کول
| ستونزه | احتمالي لامل | د حل لاره |
|---|---|---|
| انفلاسیون نه فعالیږي. | ټیټ بیټرۍ. | انفلاټر په بشپړه توګه چارج کړئ. |
| انفلاسیون له وخته مخکې ودریږي. | Preset pressure reached. | This is normal operation. Check the pressure reading. |
| ډیر ګرم کول. | Allow the device to cool down for 10 minutes before resuming use. | |
| ورو پړسوب یا د هوا نه تولید. | Air hose or nozzle not securely connected. | ډاډ ترلاسه کړئ چې ټولې اړیکې ټینګې دي. |
| Incorrect nozzle adapter used. | Select the correct adapter for the item. | |
| د فشار ناسمې شمېرنې. | د فشار غلط واحد غوره شوی. | Press the Unit Button to select the desired unit (PSI, KPA, BAR, KG/CM²). |
| د سینسر خنډ. | Ensure the air hose and valve are clear of debris. |
8. مشخصات
| فیچر | مشخصات |
|---|---|
| د ماډل نوم | SW2002 |
| برانډ | SYNCWIRE |
| اعظمي فشار | 150 PSI |
| د هوا جریان ظرفیت | په یوه دقیقه کې 18 لیټره |
| د بریښنا سرچینه | د بیټرۍ چلول |
| د عملیاتو حالت | اتوماتیک |
| د نلی اوږدوالی | ۷۸۷ انچه |
| د توکي وزن | 1.05 پونډه |
| د محصول ابعاد (LxWxH) | ۸۳.۸" x ۵۵.۷" x ۴۴.۱" |
| مواد | Durable, Reliable |
| رنګ | تور |
9. تضمین او ملاتړ
SYNCWIRE provides a د 36 میاشتو تضمین for the SW2002 Portable Tire Inflator.
For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.
Please refer to the included Warranty Policy document for detailed terms and conditions.