SFT مخکېamplifier Pickup System User Manual

1. پیژندنه

Thank you for choosing the SFT Preamplifier Pickup System. This innovative device is designed to significantly enhance the acoustic properties of your guitar, providing rich, resonant tones and versatile effects. This manual will guide you through the installation, operation, and maintenance of your new preampد ژوند کولو سیسټم.

2. کلیدي ځانګړتیاوې

• SFT (Same Frequency Trans) Technology: Drives the guitar body to phonate, increasing frequency response and making the sound more resonant, solid, and dynamic, even without an external ampلايف
• یوځای شوي اغیزې: Features built-in Reverb, Chorus, and Delay effects for creative sound shaping.
• Dual-Pickup System: Combines a piezo pickup and a microphone to capture comprehensive details of your playing, adding extensiveness and dynamics.
• د بلوتوټ ارتباط: Allows connection to a mobile phone for playing along with background music or tracks.
• د چارج وړ بیټرۍ: Equipped with a 2000mAh rechargeable Li-ion battery for portable use.
• دوامدار ساختمان: Made from Acrylonitrile Butadiene Styrene (ABS) material.

3. د بسته محتويات

مهرباني وکړئ تصدیق کړئ چې ټول توکي په کڅوړه کې شتون لري:

• 1 x SFT Preamplifier Pickup
• 1 x End-Pin Jack
• 1 x Vibrating Horn
• 1 x Pickup Wire
• 1 x د ډول-C کیبل
• 2 x کلیپ

4. ترتیب او نصب کول

مهمه یادونه: This is an on-board preamplifier system that requires opening holes in your guitar for proper installation. Professional installation by a qualified luthier or guitar technician is highly recommended to avoid damage to your instrument.

4.1. اجزاوو ختمview

شکل 4.1: پایview of the SFT Preamplifier Pickup System's controls and interfaces.

۴.۲. د نصبولو مرحلې (مسلکي نصبولو سپارښتنه کیږي)

1. ګیتار چمتو کړئ: Carefully mark the locations for the preamplifier unit, end-pin jack, and vibrating horn on your guitar.
2. سوراخونه: Precisely drill the necessary holes for mounting the components. Ensure correct sizing to prevent damage.
3. Install End-Pin Jack: Secure the end-pin jack at the designated location, typically at the bottom of the guitar.
4. Mount Vibrating Horn: Install the vibrating horn inside the guitar body, ensuring it has clear contact with the soundboard for optimal resonance transmission.
5. Connect Pickup Wire: Connect the pickup wire from the piezo pickup (usually under the saddle) to the preampژوندی واحد.
6. Install Preamplifier Unit: Mount the preamplifier unit securely, ensuring all connections are firm.
7. بیټرۍ داخل کړئ: Open the battery compartment and insert the 2000mAh rechargeable battery. Ensure correct polarity.

شکل ۳: د بیټرۍ کڅوړه چې ۳۰۰۰mAh بیټرۍ لري.

5. عملیاتي لارښوونې

5.1. بریښنا کول/بندول

Locate the power button or switch on the preamplifier unit. Press and hold (or toggle) to power the unit on or off. The Dial LED Lamp will illuminate when the unit is active.

5.2. Adjusting Effects

مخکېamplifier features dedicated controls for Reverb, Chorus, and Delay effects. Rotate the corresponding knobs to adjust the intensity of each effect. Experiment with different settings to find your desired sound.

5.3. Bluetooth (BT) Connection

The unit is equipped with Bluetooth functionality (BT5.0). To connect to your mobile phone or other Bluetooth-enabled device:

1. Ensure the preampلایفیر فعال دی.
2. په خپل ګرځنده وسیله کې بلوتوټ فعال کړئ.
3. لټون available devices. The preamplifier should appear as a discoverable device.
4. مخکې غوره کړئamplifier from the list to pair. Once paired, you can play background music through the system, which will be mixed with your guitar sound.

Figure 5.1: Bluetooth and other features.

5.4. د مایکروفون کارول

The system includes a microphone as part of its dual-pickup setup. For the microphone to be effective and audible, the preamplifier must be connected to an external speaker or amplifier. Adjust the 'Mic' control knob to blend the microphone signal with the piezo pickup signal.

6. ساتنه

6.1. د بیټرۍ چارج کول

مخکېamplifier is equipped with a 2000mAh rechargeable battery. When the battery indicator shows low power, connect the provided Type-C cable to the charging port on the unit and to a suitable USB power source. The charging rate is increased by 50% with the Type-C interface.

Figure 6.1: Charging the preamplifier via Type-C cable.

6.2. پاکول

Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.

6.3. ذخیره کول

When not in use for extended periods, store the preamplifier in a cool, dry place away from direct sunlight and extreme temperatures. It is advisable to fully charge the battery before long-term storage.

7. ستونزه حل کول

• د غږ محصول نشته:
  • Ensure the unit is powered on and fully charged.
  • Check all cable connections (pickup wire, end-pin jack to ampژوندی).
  • Verify that the volume on your amplifier/speaker is turned up.
• مایکروفون کار نه کوي:
  • The microphone requires connection to an external speaker or amplifier to be effective. Ensure your system is connected.
  • Adjust the 'Mic' control knob to increase the microphone signal.
• د بلوتوټ اتصال مسلې:
  • Ensure the preamplifier is in pairing mode or discoverable.
  • په خپل موبایل کې بلوتوث بند او فعال کړئ.
  • Move closer to the preamplifier to ensure you are within Bluetooth range.
• Poor Resonance/Effects:
  • Ensure the vibrating horn is properly installed and making good contact with the guitar's soundboard.
  • Adjust the Reverb, Chorus, and Delay knobs to desired levels.

8. مشخصات

شکل ۱۴: د محصول ابعاد.

9. تضمین او ملاتړ

Specific warranty information for this product is not provided in the available documentation. For details regarding warranty coverage, technical support, or service, please refer to the manufacturer's official website or contact the retailer from whom you purchased the product. Please retain your proof of purchase for any warranty claims.