Generic Low Loft Twin Metal Bed Instruction Manual

1. پیژندنه

د پیرودلو لپاره مننهasing the Generic Low Loft Twin Metal Bed. This manual provides important information regarding the assembly, safe use, and maintenance of your new bed frame. Please read these instructions carefully before assembly and retain them for future reference.

Image 1.1: The Low Loft Twin Metal Bed installed in a room, showing its overall appearance and design.

2. د خوندیتوب معلومات

• د اعظمي وزن ظرفیت: د دې بستر چوکاټ د ۹۰۰ پونډو اعظمي وزن ملاتړ لپاره ډیزاین شوی. له دې حد څخه مه تیریږئ.
• مجلس: Ensure all parts are correctly assembled and all fasteners are securely tightened before use. Periodically check and re-tighten fasteners as needed.
• ځای په ځای کول: Place the bed on a flat, level surface. Avoid placing near windows where cords or blinds could pose a strangulation hazard.
• د زینې خوندیتوب: Always use the ladder to access and exit the bed. Do not jump on or off the bed.
• د توشک اړتیاوې: Use only a twin-size mattress that fits snugly within the bed frame to prevent gaps.
• ماشومان: Supervise children using the loft bed. This bed is not recommended for children under 6 years of age.

3. د بسته محتويات

د اسمبلۍ پیل کولو دمخه، ډاډ ترلاسه کړئ چې لاندې لیست شوي ټولې برخې شتون لري او زیانمنې شوې نه دي. که کومه برخه ورکه یا زیانمنه شوې وي، مهرباني وکړئ د پیرودونکي ملاتړ سره اړیکه ونیسئ.

• Bed Frame Components (Headboard, Footboard, Side Rails, Ladder)
• فلزي تختې
• Hardware Pack (Bolts, Nuts, Washers, Allen Wrench)
• د لارښوونې لارښود

4. د مجلس لارښوونې

د اسمبلۍ لپاره معمولا دوه لویانو ته اړتیا وي. مهرباني وکړئ دا ګامونه په دقت سره تعقیب کړئ.

1. اجزا خلاص کړئ: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a carpet or blanket) to prevent scratches.
2. د اړخ چوکاټونه راټول کړئ: Attach the headboard and footboard sections to the side rails using the provided bolts and Allen wrench. Do not fully tighten bolts yet.
3. زینه وصل کړئ: Securely attach the ladder to the designated side of the bed frame using the appropriate hardware.
4. د تختو نصب کول: Place the metal slats across the bed frame, ensuring they are evenly spaced and secured to the side rails as indicated in the diagrams.
5. وروستی کلکوالی: Once all components are in place, systematically tighten all bolts and fasteners. Ensure the frame is stable and level.
6. د بستر موقعیت: راټول شوی د بستر چوکاټ په احتیاط سره خپل مطلوب ځای ته واستوئ.

انځور 4.1: مخکی view of the assembled bed frame, showing the ladder and overall structure.

Image 4.2: Detail of the metal slat support system, designed to eliminate the need for a box spring.

5. عملیاتي لارښوونې

• د توشک ځای پرځای کول: Place a standard twin-size mattress directly onto the metal slats. No box spring is required.
• د وزن ویش: Distribute weight evenly on the bed surface. Avoid concentrating heavy loads in one small area.
• د زینو کارول: Always face the ladder when climbing up or down. Ensure hands and feet are firmly placed on the rungs.

6. پاملرنه او ساتنه

• پاکول: د فلزي چوکاټ د نرم، ډ سره پاک کړئamp ټوکر. د سختو کیمیاوي موادو یا خړوبونکي پاکوونکو کارولو څخه ډډه وکړئ، کوم چې کولی شي پای ته زیان ورسوي.
• منظم معاینه: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent squeaking.
• د بستر حرکت: When moving the bed, lift it rather than dragging it to prevent damage to the frame and flooring.

7. ستونزه حل کول

8. د محصول مشخصات

Image 8.1: Dimensional drawing of the bed frame, showing length (77.95"), width (41.26"), and height (50.00").

۷. تضمین او د پیرودونکو ملاتړ

This product comes with a 90-day return policy. For any questions, missing parts, or support needs, please contact the seller, QiMaieeUSA, directly through your purchase platform. Please have your order number and product model information ready when contacting support.