CONTEC CMS50Q1 Fingertip Pulse Oximeter User Manual

1. پیژندنه

The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.

Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.

2. محصول ختم شوview

2.1 کلیدي ځانګړتیاوې

• Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
• Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
• ښکاره کول: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
• اسانه عملیات: Simple one-button operation for power on and measurement.
• راحته ډیزاین: Fingertip clip made with silica gel material for comfort.
• د بیټرۍ اوږد ژوند: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.

۲.۱ په بکس کې څه دي

• CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
• لاینارډ
• د کارن لارښود
• Cartoon Stickers
• Screwdriver (for battery compartment)

2.3 د محصول اجزا

This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.

3. ترتیب کول

3.1 د بیټرۍ نصب کول

1. Locate the battery compartment on the back of the oximeter.
2. Use the provided screwdriver to loosen the screw on the battery cover.
3. د بیټرۍ پوښ بند کړئ.
4. دوه AAA بیټرۍ (شاملې نه دي) په کمپارټمینټ کې دننه کړئ، د سم قطبیت ډاډ ترلاسه کول (+/-).
5. Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.

This image demonstrates the battery installation process and subsequent steps for taking a measurement.

۳.۲ د لینارډ نښلول

Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.

This image shows the device dimensions and how to attach the included lanyard.

4. عملیاتي لارښوونې

4.1 اندازه کول

1. Ensure the oximeter has batteries installed.
2. Open the clip of the oximeter.
3. Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
4. Press the power button once to turn on the oximeter.
5. Keep your hand still and avoid movement during the measurement.
6. The SpO2 and pulse rate readings will appear on the display within a few seconds.

۵.۳ د ښودنې سمت

The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.

This image demonstrates the rotatable display feature of the oximeter.

4.3 اتوماتیک بریښنا بند

The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.

5. د معلوماتو ښکاره کول

The TFT display provides the following information:

• SpO2 (٪): د وینې د اکسیجن د اشباع کچه.
• د وخت په تیریدو سره: Pulse Rate in beats per minute.
• بار ګراف: A visual representation of pulse strength.
• د نبض څپې بڼه: A graphical representation of the pulse.
• د ټیټ بیټرۍ شاخص: An icon indicating when batteries need replacement.

This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.

6. ساتنه او پالنه

6.1 Cleaning the Oximeter

• Clean the surface of the oximeter before and after each use with a soft cloth dampد طبي الکولو (۷۰٪ ایتانول یا ایزوپروپانول) سره مخلوط شوی.
• Do not immerse the device in water or other cleaning solutions.
• ډاډ ترلاسه کړئ چې وسیله د بیا کارولو دمخه په بشپړه توګه وچه ده.

6.2 د بیټرۍ بدلول

When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.

6.3 ذخیره کول

Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.

7. ستونزه حل کول

8. مشخصات

• د محصول ابعاد: 2.32 x 1.42 x 1.38 انچه
• د توکي وزن: 3.52 اونس
• Measuring Range SpO2: 70-100٪
• Measuring Range Pulse Rate: 0-250 bpm
• د بیټرۍ ژوند: تقریبا 20-30 ساعته
• د بریښنا سرچینه: 2 x AAA بیټرۍ (شامل ندي)
• اتومات بندول: د 5 ثانیو غیر فعالیت وروسته
• جوړونکی: Contec Medical Systems Co.,Ltd

9. د خوندیتوب معلومات

• دا وسیله یوازې د سپورت او هوايي چلند لپاره ده. دا طبي وسیله نه ده او باید د طبي تشخیص یا درملنې لپاره ونه کارول شي.
• Do not use the oximeter during sports activities, as movement can affect accuracy.
• Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
• Avoid exposing the device to direct sunlight, high temperatures, or moisture.
• Do not attempt to repair or modify the device yourself. Contact support if issues arise.

۹. د ملاتړ معلومات

For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:

• د تخنیکي ملاتړ تلیفون: +86-335-8015431
• بریښنالیک: contecmed@contecmed.com.cn
• Webسایټ: http://www.contecmed.com

Please refer to the official CONTEC webد ځانګړو تضمین شرایطو او مقرراتو لپاره سایټ یا ستاسو د پیرود اسناد.