DJI Mavic 3 Series 100W Battery Charging Hub Instruction Manual

1. محصول ختم شوview

The DJI Mavic 3 Series 100W Battery Charging Hub is designed to enhance the charging efficiency for your DJI Mavic 3 Intelligent Flight Batteries. When connected to a designated charger, this hub expands the charging interface to accommodate up to three batteries. It features an intelligent design that charges batteries in sequence, prioritizing those with lower power levels to get you back in the air faster.

کلیدي ځانګړتیاوې:

• Three-Battery Charging: Expands charging capacity to three batteries simultaneously.
• Intelligent Sequential Charging: Prioritizes charging batteries with lower power levels first, optimizing efficiency.
• مطابقت: Designed for DJI Mavic 3 Intelligent Flight Battery, DJI 100W USB-C Power Adapter, DJI 65W Portable Charger, and DJI 65W Car Charger.
• تړون ډیزاین: د اسانه ترانسپورت لپاره لږ وزن او پورټ ایبل.

Figure 1: The DJI Mavic 3 Series 100W Battery Charging Hub, a compact device designed to charge up to three drone batteries.

۴. د تنظیم لارښوونې

Before using your DJI Mavic 3 Series 100W Battery Charging Hub, ensure you have a compatible power adapter. The charging hub itself does not include a charger.

1. مرکز خلاص کړئ: Carefully remove the charging hub from its packaging.
2. Prepare Power Adapter: Connect your compatible DJI 100W USB-C Power Adapter, DJI 65W Portable Charger, or DJI 65W Car Charger to a power source.
3. Connect Charging Hub: Plug the USB-C cable from your power adapter into the USB-C port on the side of the charging hub.
4. بیټرۍ داخل کړئ: Gently slide up to three DJI Mavic 3 Intelligent Flight Batteries into the designated slots on the charging hub. Ensure they are securely seated.

Figure 2: The charging hub with two DJI Mavic 3 Intelligent Flight Batteries inserted, ready for charging. Note the USB-C port for connecting the power adapter.

3. عملیاتي لارښوونې

The DJI Mavic 3 Series 100W Battery Charging Hub operates with intelligent sequential charging to maximize efficiency.

1. د پیل لګښت: Once batteries are inserted and the hub is connected to a power source, the hub will automatically begin charging.
2. پرله پسې چارج: The hub will assess the charge level of all inserted batteries and prioritize charging the battery with the lowest remaining power first. Once that battery is fully charged, it will proceed to charge the next battery with the lowest power, and so on, until all batteries are fully charged.
3. Monitoring Charge Status: Refer to the battery's LED indicators to monitor its individual charging progress. The hub itself may also have indicators (check product-specific documentation for details).
4. د چارج کولو وخت: Charging times will vary depending on the power adapter used (e.g., 100W vs. 65W) and the initial charge level of the batteries. A 100W adapter will provide faster charging.

مهم نظرونه:

• Always use DJI-approved power adapters for optimal performance and safety.
• The charging hub may become warm during operation, which is normal.
• Do not attempt to charge non-compatible batteries with this hub.

4. ساتنه

Proper maintenance ensures the longevity and optimal performance of your charging hub.

• پاکول: Use a soft, dry cloth to wipe the surface of the charging hub. Do not use liquid cleaners or solvents.
• ذخیره کول: د چارج کولو مرکز په یخ او وچ ځای کې وساتئ، د مستقیم لمر وړانګو او سختې تودوخې څخه لرې وساتئ کله چې کارول نه وي.
• معاینه: Periodically inspect the USB-C port and battery contacts for any signs of damage or debris.
• د رطوبت څخه ډډه وکړئ: Keep the charging hub away from water and other liquids to prevent damage.

5. ستونزه حل کول

که تاسو د خپل چارج کولو مرکز سره ستونزې سره مخ شئ، لاندې عام حلونو ته مراجعه وکړئ:

• Hub Not Charging:
  • Ensure the power adapter is properly connected to both the power source and the charging hub.
  • ډاډ ترلاسه کړئ چې د بریښنا اډاپټر په سمه توګه کار کوي.
  • Check if the batteries are correctly inserted into the hub slots.
• ورو چارج کول:
  • Confirm that you are using a compatible and sufficiently powerful charger (e.g., 100W for fastest charging).
  • Ensure the USB-C cable is not damaged and is fully inserted.
• Battery Not Recognized:
  • Remove and re-insert the battery to ensure proper contact.
  • Check for any debris or damage on the battery contacts or within the hub slots.

If the issue persists, please contact DJI customer support for further assistance.

6. مشخصات

7. تضمین او ملاتړ

د تضمین معلومات:

The DJI Mavic 3 Series 100W Battery Charging Hub is covered by the standard DJI Warranty. For specific terms and conditions, please refer to the official DJI warranty policy provided with your product or visit the official DJI webسایټ

د پیرودونکي ملاتړ:

For technical assistance, troubleshooting, or warranty claims, please contact DJI customer support through their official website or the contact information provided in your product packaging. Ensure you have your product model number (CP.EN.00000422.01) and proof of purchase available when contacting support.