DSC HS2LCD N PowerSeries NEO Full Message LCD Hardwired Keypad User Manual

پیژندنه

This manual provides essential information for the installation, operation, and maintenance of the DSC HS2LCD N PowerSeries NEO Full Message LCD Hardwired Keypad. This keypad is designed to work seamlessly with DSC PowerSeries NEO control panels, including models HS2016, HS2032, HS2064, and HS2128.

The image displays the DSC HS2LCD N keypad, a white, rectangular device with a prominent blue LCD screen. The screen shows the text 'System is Ready to Arm'. The DSC logo is visible on the lower left of the keypad.

نصب او تنظیم کول

The DSC HS2LCD N keypad is a hardwired device requiring professional installation.

د نصب کولو دمخه چک لیست

• Ensure the control panel is powered off before connecting the keypad.
• Verify compatibility with your PowerSeries NEO control panel (HS2016, HS2032, HS2064, HS2128).
• Have necessary tools: screwdriver, wire strippers, mounting hardware.

د تار لګولو لارښوونې

Connect the keypad to the control panel's Keybus terminals (Red, Black, Yellow, Green) following the wiring diagram provided with your control panel. Ensure correct polarity.

پورته کول

Mount the keypad securely on a flat surface using the provided mounting screws. Ensure it is placed in a location easily accessible for daily use.

عملیاتي لارښوونې

The HS2LCD N keypad provides a full message LCD display for clear system status and intuitive operation.

د نظام وسله وال کول

• وسله وال پاتې شئ: فشار ورکړئ او ونیسئ پاتې شه button or enter your user code followed by *9.
• لرې وسله: Enter your user code. The system will arm after the exit delay.
• د نه ننوتلو وسله: فشار ورکړئ او ونیسئ No-Entry button or enter your user code followed by *1.

د سیسټم بې وسلې کول

Enter your user code when the system is armed or in alarm.

Viewد سیسټم حالت

The LCD will display messages such as "System is Ready to Arm", "System Armed", or "Alarm". Use the arrow keys (< >) to scroll through event buffers or system messages.

د دندو ته لاسرسی

Refer to your main control panel manual for specific function codes and programming options accessible via the keypad. Common functions include:

• Bypass Zones: *1 followed by zone number(s).
• ستونزه ښکاره کول: *2.
• Memory of Alarms: *3.
• د وخت او نیټې ترتیب: *6 followed by master code.

ساتنه او پالنه

• پاکول: Wipe the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• منظم ازموینه: Periodically test your alarm system, including the keypad, in conjunction with your alarm monitoring company.
• د بریښنا رسول: Ensure a stable power supply to the control panel to prevent keypad malfunctions.

د ستونزو حل کول

This section addresses common issues you might encounter with your DSC HS2LCD N keypad.

کیپډ ځواب نه ورکوي

• ځواک چیک کړئ: Ensure the control panel has power.
• تارونه: Verify all Keybus connections are secure and correctly wired (Red, Black, Yellow, Green).
• Control Panel Status: Check the main control panel for error indicators.

"Trouble" Light On

• مطبوعاتي *2 on the keypad to view the specific trouble condition (e.g., AC failure, battery trouble, zone fault).
• Consult your control panel manual for detailed explanations of trouble codes.

Incorrect Time/Date Display

• د کارولو *6 master code command to set the correct time and date.

Keypad Beeping

• A continuous beep usually indicates a trouble condition. Press *2 to identify the issue.
• A short beep confirms key presses.

تخنیکي مشخصات

تضمین او د پیرودونکي ملاتړ

دا محصول د پیرود نیټې څخه د 12 میاشتو تضمین سره راځي.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized DSC dealer or the product manufacturer.

For more information, visit the official DSC website or consult your installer.