ViLoSa Talking Watch Instruction Manual

1. پیژندنه

The ViLoSa Talking Watch is designed to assist individuals with visual impairment by audibly announcing the time, date, and alarm settings. Featuring a clear white face with large black numbers and a comfortable stainless steel expansion strap, this watch combines traditional analog display with convenient voice functionality. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your talking watch.

Figure 1: ViLoSa Talking Watch (Front View)

This image displays the ViLoSa Talking Watch, featuring a white watch face with large, clear black numbers, and a gold-colored stainless steel expansion band. The watch has a classic round design, making it easy to read and wear.

2. محصول ختم شوview

Familiarize yourself with the main components of your ViLoSa Talking Watch:

• مخ لید: انالوګ ښودنه د ساعت، دقیقې او دوهم لاسونو سره.
• S1 Button (Top Right): Used for time and date announcement.
• Crown (Middle Right): Used to manually set the analog time.
• S2 Button (Bottom Right): Used for setting the digital time, date, and alarm. This button is recessed and requires a small pointed object (like a toothpick or pen tip) to press.
• سپیکر: Located on the watch case, for audible announcements.
• Stainless Steel Expansion Strap: یو آرام او خوندي فټ چمتو کوي.

شکل 2: اړخ View د کنټرول تڼیو سره

This image highlights the side of the ViLoSa Talking Watch, clearly labeling the S1 button (top), the Crown (middle), and the recessed S2 button (bottom). These controls are essential for operating and setting the watch's functions.

3. ترتیب کول

3.1. د بیټرۍ نصب کول

Your ViLoSa Talking Watch requires one CR2032 battery. The watch typically comes with a battery installed and a plastic tab to prevent discharge during shipping. Remove this tab before first use. If the watch is not speaking or the display is dim, the battery may need replacement.

• To replace the battery, carefully open the back cover of the watch.
• زوړ CR2032 بیټرۍ لرې کړئ او یوه نوې دننه کړئ، د سم قطبیت ډاډ ترلاسه کولو لپاره (+ اړخ پورته).
• په خوندي ډول د شا پوښ وتړئ.

Figure 3: Watch Back Cover

This image shows the back of the ViLoSa Talking Watch, highlighting the stainless steel back cover where the battery compartment is located. This cover can be carefully opened for battery replacement.

۱. د لومړني وخت او نیټې ټاکل

It is important to set both the analog time (visible hands) and the digital talking time for accurate announcements.

د انلاګ وخت ټاکل:

• راویښ کړئ تاج (middle right button) to the setting position.
• Rotate the Crown to move the hour and minute hands to the desired time.
• Once set, push the Crown back in to start the analog movement.

Setting Digital Time, Date, and Alarm:

د پخلنځي کارول S2 Button (bottom right) and a small pointed object (e.g., toothpick) to set the digital functions. Each press of S2 advances through the setting modes. The watch will audibly confirm each setting.

1. مطبوعاتي S2 once: The watch will announce "Set Hour". Press S1 repeatedly to adjust the hour (AM/PM will be announced).
2. مطبوعاتي S2 again: The watch will announce "Set Minute". Press S1 repeatedly to adjust the minute.
3. مطبوعاتي S2 again: The watch will announce "Set Year". Press S1 repeatedly to adjust the year.
4. مطبوعاتي S2 again: The watch will announce "Set Month". Press S1 repeatedly to adjust the month.
5. مطبوعاتي S2 again: The watch will announce "Set Day". Press S1 repeatedly to adjust the day of the month.
6. مطبوعاتي S2 again: The watch will announce "Set Alarm Hour". Press S1 repeatedly to adjust the alarm hour.
7. مطبوعاتي S2 again: The watch will announce "Set Alarm Minute". Press S1 repeatedly to adjust the alarm minute.
8. مطبوعاتي S2 again: The watch will announce "Alarm On/Off". Press S1 د الارم چلول یا بندول.
9. مطبوعاتي S2 again: The watch will exit setting mode and announce the current time.

Ensure the analog time matches the digital talking time for consistency.

4. عملیاتي لارښوونې

4.1. Announcing Time

To hear the current time announced:

• فشار ورکړئ S1 Button (top right) once. The watch will speak the current time (e.g., "The time is 2:36 AM").

4.2. Announcing Date

To hear the current date announced:

• فشار ورکړئ S1 Button (top right) twice in quick succession. The watch will speak the current date (e.g., "The date is November 13th, Friday").

4.3. Announcing Alarm Time

To hear the set alarm time:

• While in normal operating mode (not setting mode), press the S2 Button (bottom right) once using a small pointed object. The watch will announce the set alarm time.

5. ساتنه

• پاکول: Wipe the watch with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• د اوبو مقاومت: This watch is generally splash-resistant but not waterproof. Avoid submerging it in water or exposing it to heavy rain.
• د بیټرۍ ژوند: The CR2032 battery typically lasts for an extended period. Replace it when the voice announcements become faint or stop working.
• ذخیره کول: کله چې د اوږدې مودې لپاره نه کارول کیږي، ساعت په یخ او وچ ځای کې وساتئ.

6. ستونزه حل کول

7. مشخصات

• ماډل: gold-gold
• نښه: ViLoSa
• د بیټرۍ ډول: ۱ x CR2032 (لازمي)
• ښکاره کول: Analog with audible time/date/alarm announcement
• د پټې ډول: Stainless Steel Expansion Strap
• Face Color: White with Black Numbers
• نږدې ابعاد:
  

  شکل ۶: د څار ابعاد

  This image provides a visual representation of the watch's dimensions, indicating a width of approximately 33.5mm (1.31 inches) and a band width of 16mm (0.62 inches).
• د اصلي هیواد: چین

8. تضمین او ملاتړ

For any questions, concerns, or technical support regarding your ViLoSa Talking Watch, please contact the manufacturer directly through the retailer's platform or the official ViLoSa webسایټ. مهرباني وکړئ د تضمین ادعاوو لپاره د پیرود ثبوت وساتئ.